Sobrepeldaño aluminio antideslizante seguridad
Sobrepeldaño aluminio antideslizante seguridad
Sobrepeldaño aluminio antideslizante seguridad
Sobrepeldaño aluminio antideslizante seguridad
Sobrepeldaño aluminio antideslizante seguridad
Sobrepeldaño aluminio antideslizante seguridad

Novopeldaño Elegance - Stainless steel profiles for non-slip stairs

165

Stair tread profiles or edge guards with a non-slip surface that combines the polished and brushed finish of Stainless Steel. Ideal for public spaces, hotels, hospitals, airports, large surfaces

Height (mm)
Width (mm)
Long (cm)
Color
Adhesive
165640
€32.45
Tax excluded

Quantity Unit discount You Save
10 2% €6.49
20 5% €32.45

Description

Stair tread profiles or edge guards with non-slip surface. Spectacular decorative rung cap made of AISI-304 stainless steel. Its non-slip surface improves the slip resistance value (Rd) of the pavement that it complements, favoring compliance with the Technical Building Code (C.T.E.).

This step trim is installed without the need for work, being ideal for renovation or rehabilitation work. Its grooves and relief increase the safety of any pavement and protect the edges of the steps from bumps and impacts. It is placed on top of the existing tiling.

It is also ideal for public spaces such as airports, shopping centers, etc. or private homes.

Novopeldaño Elegance is available in a Brico pack, with adhesive included and ready for installation. It is offered in high-gloss brushed steel combined finishes and vice versa.

Made of AISI 304 stainless steel. Bright finish edges and brushed central area.

Non-slip stainless steel non-slip stair profiles

Dimensions

  • a: 41 mm
  • h: 15 mm
  • Length: 2.50 ml
  • C = central area
  • L = lateral zone

Technical characteristics and tests

  • Alloy: AISI-304 / Composition test of each batch / AIMME
  • Corrosion resistance: Salt spray test + 504 hours without variation (inox) + 650 hours without variation (titanium coated stainless steel) / UNE 112017: 92 / AIMME
  • Slip resistance: Excellent / UNE-ENV 12633: 2003 / AIDICO

Materials

Stainless steel

Novopeldaño Elegance is a profile made of AISI-304 stainless steel. All batches of material used are subjected to a chemical composition test to determine that they meet the alloy specification. Stainless steel has also been tested for corrosion resistance, exceeding 500 hours of exposure without showing signs of corrosion. Stainless steel is a highly resistant and durable material with an excellent surface appearance that does not degrade with the passage weather. The finishes available are high gloss, brushed or the future range whose coating contains titanium. All finishes are smooth and slightly porous, thus facilitating the hygiene of the installation. Novopeldaño Elegance combines high-gloss stainless steel with brushed, in two different configurations available.

Placement

  1. If you have purchased Novopeldaño® Elegance without adhesive: Clean the surfaces to be joined to guarantee perfect adhesion. Remove the protective film from the inside of the Novopeldaño Elegance in order to facilitate its complete subsequent removal. Spread abundant adhesive material such as Fischer Express Adhesive Sealant / Adhesive or similar on the unseen face of the Novopeldaño Elegance, place the profile on the desired surface and press carefully. Finally, let the adhesive dry and remove the protective film.
  2. If you have purchased Novopeldaño Elegance with adhesive tape or the Bricopeldaño Elegance with adhesive: Clean the surface where you are going to place the profile to guarantee perfect adhesion. Remove the protective film from the inside of the Novopeldaño Elegance in order to facilitate its complete subsequent removal. Remove the film from the adhesive tape, place the profile on the desired surface and press carefully. Finally remove the protective film.

If the Novopeldaño Elegance installation is going to be painted or made later, keep the protective film until the operation has been completed.

Cleaning and maintenance

Cleaning the material immediately after installation is essential to avoid the remains of mortar, cement or iron particles from scouring pads or tools causing corrosion pitting.

For outdoor applications, precipitation is an efficient cleaner. Pay special attention to hard-to-reach areas and make sure you remove all traces of dust and other items. You can do this cleaning once a month.

For interior applications, you can use dishwashing liquid, detergent, or liquid soap to remove dirt and possible fingerprints that have been marked. In high gloss finishes you can use a glass cleaner. There are specific stainless steel cleaners on the market that clean it and reduce the appearance of possible stains. Whenever you clean the stainless steel, be sure to rinse it well and dry it completely to avoid tarnishing.

Steel wool or similar products are not recommended, as they can scratch the surface and create corrosion pitting. Take special care in the use of materials containing chlorides, as they are contraindicated as they cause oxidation. Hydrochloric acid or iron products in prolonged contact are also not recommended. Never use ordinary steel cleaners for stainless steel.

Product Details

Product added to wishlist
Product added to compare.

SPECIAL OFFER

EASTER WEEK 2024

from March 27 to April 1, 2024

10% discount on all products

using the coupon: SANTA2024

IMPORTANT ANNOUNCEMENT

Due to the Easter holiday period, orders placed between

03/27/2024 and 04/01/2024 will be processed starting Tuesday, April 2.

Sorry for the inconvenience.