Search results

€10.02
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
€30.71
Solid brass separation and decoration profile for terrazzo floors. Available in natural brass and can be polished at the same time as the floor.
Edging & outside wall corners profiles

JOLLY-P - Decorative PVC edging profile

153
€6.92
PVC decorative edging profile and skirting covering that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
Profile Accessories

QUADEC-E - angle

153
€4.50
Angle for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
Profile Accessories

QUADEC-E - plug

153
€2.29
Plug accessory for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
Profile Accessories

QUADEC-FS - angle

153
€29.97
Angle accessory for QUADEC-FS. Decorative profile, which allows the insertion of borders or ceramic strips.
Profile Accessories

QUADEC-MC - angle

153
€4.44
Angle accessory for QUADEC-MC. High quality chrome-plated brass trim profile for outer corners of ceramic clad walls.
Profile Accessories

QUADEC-AC - angle

153
€4.44
Angle accessory for QUADEC-AC. High quality anodized aluminum finish profile for exterior corners of ceramic walls.
Profile Accessories

RONDEC-E - Lateral closure cap

153
€2.29
Plug or side cover accessory for RONDEC-E. Stainless steel profiles for wall corners with ceramic tiles, with different finishes.
Profile Accessories

RONDEC-E - Special splice piece

153
€2.20
RONDEC-E and SCHIENE-E splicing accessory. Stainless steel profiles for the corners of walls with ceramic coverings, with different finishes.
Profile Accessories

RONDEC-A - external angle

153
€3.57
Accessory for external angle. RONDEC-A is an anodized aluminum profile for wall corners with ceramic coatings.
Profile Accessories

RONDEC-A - internal angle

153
€3.57
Internal angle accessory for RONDEC-A. Anodized aluminum profile for wall corners with ceramic cladding.
Profile Accessories

RONDEC-A - splice

153
€1.18
RONDEC-A splicing accessory. Anodized aluminum profile for wall corners with ceramic cladding.
Profile Accessories

RONDEC-AC - External angle

153
€3.57
External angle accessory for RONDEC-AC. Rounded aluminum corner profile lacquered in colors for the corners of walls with ceramic tiles.
Profile Accessories

RONDEC-AC - Internal Angle

153
€3.57
Internal angle for RONDEC-AC. Rounded aluminum corner bar lacquered in colors for the corners of walls with ceramic tiles.
Profile Accessories

RONDEC-TS - external angle

153
€11.89
RONDEC-TS external angle accessory. Rounded aluminum profile with a surface with relief for the corners of walls with ceramics.
Profile Accessories

RONDEC-TS - internal angle

153
€11.89
RONDEC-TS internal angle accessory. Rounded aluminum profile with a surface with relief for the corners of walls with ceramics.
Profile Accessories

RONDEC-PRO - external angle

153
€1.89
Accessory for external angle. RONDEC-PRO is a decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-PRO - internal angle

153
€1.89
Accessory for internal angle. RONDEC-PRO is a decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-PRG - External angle

153
€1.89
RONDEC-PRG - external angle. Decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-PRG - Internal Angle

153
€1.89
RONDEC-PRG - internal angle. Decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-STEP-CT - External angle of 90º

153
€29.78
External angle of 90º for aluminum corner profile RONDEC-STEP-CT for edge protection for kitchen countertops with ceramic coverings.
Profile Accessories

RONDEC-STEP-CT - Internal angle of 90º

153
€29.78
Internal angle of 90º for corner profile or countertop guard RONDEC-STEP-CT for protection of edges or edges of kitchen countertops.
Profile Accessories

RONDEC-STEP-CT - 135º internal angle

153
€29.78
Internal angle of 135º for RONDEC-STEP-CT corner profile. Aluminum profile for edge protection on kitchen countertops with ceramic coatings.
€29.78
Internal angle 90º for RONDEC-STEP. Profile for singing countertops and ceramic tile steps. For the singing of countertops and ceramic steps.
Profile Accessories

RONDEC-STEP - 135º internal angle

153
€29.78
Internal angle 135 for RONDEC-STEP aluminum corner. Edge protection profile of ceramic countertops and steps.
Profile Accessories

DIADEC - external angle

153
€24.10
External angle accessory for DIADEC. Anodized aluminum trim profile for exterior corners of walls and finishes of ceramic coatings.
Profile Accessories

INDEC - External angle

153
€4.65
External angle accessory for INDEC. Profile of anodized aluminum corners for exterior corners of walls and finishes of ceramic coatings.
Profile Accessories

ECK-KHK - stainless steel splice

153
€7.76
Junction fitting for stainless steel cove-shaped profile ECK-KHK. Profile for subsequent mounting to the inner corners of ceramic and cladding.
Accessories for stair steps

TREP-B - Cap or plug accessory

153
€2.04
TREP-B plug accessory. Aluminum or stainless steel profiles for steps, with a replaceable stepped surface of non-slip synthetic rubber.
Accessories for stair steps

TREP-B - Replacement rubber

153
€18.70
TREP-B rubber replacement. Aluminum or stainless steel profiles for steps, with a replaceable stepped surface of non-slip synthetic rubber.
Accessories for stair steps

TREP-S - Cap or plug accessory

153
€1.24
TREP-S cap or cap accessory. Aluminum or stainless steel profiles for rungs, with replaceable stepped surface of non-slip synthetic rubber.
Accessories for stair steps

TREP-S - Spare rubber accessory part

153
€15.85
TREP-S replacement rubber. Aluminum or stainless steel profiles for steps, with a replaceable stepped surface of non-slip synthetic rubber.
Accessories for stair steps

TREP-E - plug

153
€2.49
Plug accessory for TREP-E. Stainless steel profile for non-slip steps.
Accessories for stair steps

TREP-FL - plug

153
€2.42
Plug accessory for TREP-FL. Aluminum or stainless steel ladder profile in non-slip Florentine shape for safe construction. .
Movement joint

DILEX-BT / MT

153
€53.42
Supporting profile for the sanitation of structural joints, which can be combined with Schlüter®-DILEX-BT / O or RENO-VT in all sizes.
Movement joint

DILEX-BT / OT

153
€20.07
Profile bearing wall of the structural joint and can be combined with any height of Schlüter®-DILEX-BT / MT and -RENO-VT.
Movement joint

DILEX-BT / VTS

153
€26.65
Supporting profile for the sanitation of structural joints, which can be combined with Schlüter®-DILEX-BT / MT.
Movement joint

DILEX-AS - Angle accessory

153
€1.43
Angle accessory for DILEX-AS. Flexible Scottish sanitary profile for delivery to shower trays and door and window frames.
Floor and wall bridge joints

DILEX-EF - Floor or wall meeting board

153
€17.58
Expansion joint or flexible hard / soft plastic meeting as a meeting joint for interior corners between walls or floor / wall delivery.
Floor and wall bridge joints

DILEX-EKE - Floor or wall meeting board

153
€17.58
DILEX-EKE expansion or meeting board. Flexible plastic profile for corner joints, corners or for the connection between floor and wall.
Movement joint

DILEX-HK - Internal Angle

153
€4.12
DILEX-HK internal angle accessory. PVC half-round profile, floor / wall. Hygiene and cleaning for food industry, kitchens, other applications.
Movement joint

DILEX-HK - External angle

153
€4.12
DILEX-HK external angle accessory. PVC half-round profile, floor / wall. Hygiene and cleaning for food industry, kitchens, other applications.
€3.09
DILEX-HK sanitary right plug accessory. PVC half-round profile, floor / wall. Hygiene in food industry, kitchens, other applications.
€3.09
Accessory cover or cap left for cove-shaped profile sanitary DILEX-HK. PVC half-round profile, floor / wall. Hygiene and cleaning.
Movement joint

DILEX-HKW - Internal Angle

153
€4.12
Internal angle for cove-shaped profile sanitary DILEX-HKW. Half stainless steel rod as flexible movement joint for floor / wall ceramic coverings.
Movement joint

DILEX-HKW - External angle

153
€4.12
External angle for DILEX-HKW. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
€3.09
Plug accessory for DILEX-HKW. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
Movement joint

DILEX-HKS - corners

153
€43.32
DILEX-HKS corner accessory. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
€8.13
External angle of 90º for DILEX-EHK. Half-round profile or cove-shaped profile sanitary stainless steel for delivery between floor / wall in ceramics.
€10.57
External angle of 135º for DILEX-EHK. cove-shaped profile sanitary stainless steel to solve meetings and delivery between floor and wall.
Movement joint

DILEX-EHK - 90º internal angle

153
€10.57
90º internal angle for cove-shaped profile sanitary DILEX-EHK. Half stainless steel rod for floor and wall meetings in ceramic coatings.
€10.57
135º internal angle for DILEX-EHK. cove-shaped profile sanitary or half stainless steel rod for delivery between floor / wall in ceramic coatings.
€10.32
Splicing accessory for DILEX-EHK. cove-shaped profile sanitary stainless steel for delivery between floor / wall in ceramic coatings.
€7.95
External angle 90º DILEX-HKU. Stainless steel half round profile. for interior floor / wall corners with high hygienic requirements.
€7.95
External angle 135º DILEX-HKU. Stainless steel half round profile. for interior floor / wall corners with high hygienic requirements.
€7.95
Internal angle 90º for DILEX-HKU. Stainless steel half round profile. for interior floor / wall corners with high hygienic requirements.
€7.95
Internal angle 135º for DILEX-HKU. Stainless steel half round profile. for interior floor / wall corners with high hygienic requirements.
€7.76
Splicing accessory for DILEX-HKU. Stainless steel half round profile. for interior corners between walls with high hygienic requirements.
€25.74
External angle 90º for DILEX-AHK Rondec. Profile of sanitary cove-shaped profile or half aluminum cane for meeting between floor and wall, kitchen countertops.
€25.74
External angle 90º for DILEX-AHK Quadec. cove-shaped profile sanitary or half aluminum cane for floor and wall meetings, kitchen countertops with ceramic tiles.
Movement joint

DILEX-AHK - 90º internal angle

153
€25.74
Internal angle 90º for DILEX-AHK. Aluminum half-round profile for meeting between floor and wall, kitchen countertops with ceramic tiles.
€25.74
135º internal angle for DILEX-AHK. Aluminum half-round profile for meeting between floor and wall, kitchen countertops with ceramic tiles.
€16.52
Cap for DILEX-AHK. Aluminum half-round profile for meeting between floor and wall, kitchen countertops or shelves with a ceramic coating.
Movement joint

DILEX-AHK - Splice Accessory

153
€3.90
Splice for DILEX-AHK. Aluminum half-round profile for meeting between floor and wall, kitchen countertops or shelves with a ceramic coating.
€25.74
External angle 90º for cove-shaped profile sanitary DILEX-AHKA. Aluminum cane half profile for joining floors, walls and kitchen countertops
€25.74
External angle 135º for DILEX-AHKA. Scottish sanitary profile in half aluminum shank for joining floors and walls in a hygienic way.
€25.74
Internal angle 90º for the Scottish sanitary model DILEX-AHKA. Aluminum cane half profile for hygienic joints between floors and walls.
€25.74
135º internal angle for DILEX-AHKA. Profile half cane or cove-shaped profile sanitary aluminum for clean joints between floors and walls.
€16.52
Right cap or cap for cove-shaped profile sanitary DILEX-AHKA. Aluminum half-round profile for joining floors, walls and kitchen countertops.
€16.52
Left cap for DILEX-AHKA. Profile of sanitary cove-shaped profile in half aluminum cane for joining floors and walls in a hygienic and clean way.
€3.90
DILEX-HKU interior splicing accessory. Stainless steel half round profile. for corners between walls with high hygienic requirements.
€6.84
DILEX-HKU cap or plug accessory. Stainless steel half round profile. for interior corners between walls with high hygienic requirements.
€10.40
Rubber for decorative borders or listels for kitchens and bathrooms ARCLINE-APE model. Decorative lists for accessory placement ARCLINE-BAK
Profile with slimm visible side made of aluminium or brass which can be curvable, designed to cover joints and separate floorings. This profile, due to its dimensions, is intended to be installed before or after the tiling. The brass model has two heights available. The profile is perfect to be installed in floorings like marble or terrazzo as it can be...
Accesories for balcony Profiles

BARA-RTK - external angle 90°

153
€52.82
External angle 90 ° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTK - internal angle 90°

153
€52.82
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTK - external angle 135°

153
€58.15
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTK - splice

153
€3.04
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKEG - external angle 90°

153
€54.61
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKEG - internal angle 90°

153
€54.61
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKEG - external angle 135°

153
€54.61
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTP - external angle 90 °

153
€44.39
External angle 90 ° for gutter profile to be placed on existing balconies and terraces, and serves as a support for the Schlüter®-BARIN drainage gutters.
Accesories for balcony Profiles

BARA-RTP - internal angle 90 °

153
€44.39
90 ° internally angled piece for rain gutter profile to be placed on existing balconies and terraces, and serves as a support for drainage gutters.
Accesories for balcony Profiles

BARA-RTP - external angle 135 °

153
€48.85
External angle 135 ° top for profile gutter to place on existing balconies and terraces, and serves as a support for drainpipes.
Accesories for balcony Profiles

BARA-RTP - special splice piece

153
€3.04
Special attachment for gutter profiles placed on edges of existing balconies and terraces, and serves as a support for gutters.
Accesories for balcony Profiles

BARA-RT - external angle 90°

153
€38.49
External angle 90 ° for T-shaped gutter profile, lacquered aluminum, for finishing balconies and terraces.
Accesories for balcony Profiles

BARA-RT - splice

153
€6.07
Splice for T-shaped gutter profile, in lacquered aluminum, for finishing balconies and terraces.
Accesories for balcony Profiles

BARA-RK - External angle of 90 °

153
€41.06
External angle 90 ° for BARA-RK profile. Edge or gutter profile for balconies and terraces for use in BARA-RK profiles
Accesories for balcony Profiles

BARA-RK - 90 ° internal angle

153
€41.06
90 ° internal angle for BARA-RK profile. The front is a watershed and the back covers the junction with the TROBA drainage surface.
Accesories for balcony Profiles

BARA-RK - External angle of 135 °

153
€45.29
External angle of 135 ° for BARA-RK profile. Profile for water vents or edge of balconies and terraces model BARA-RK.
Accesories for balcony Profiles

BARA-RK - Splice piece

153
€3.46
Part special piece for tie or splice for BARA-RK profiles. Profile for pours or edge of balconies and terraces.
Accesories for balcony Profiles

BARA-RKK - 90 ° external angle

153
€46.09
External angle 90 ° for T-shaped gutter with dropper, which is placed on a slope with slope.
Accesories for balcony Profiles

BARA-RKK - 90 ° internal angle

153
€46.09
Internal angle 90 ° for T-shaped gutter with dropper, which is placed on a slope with slope.
Accesories for balcony Profiles

BARA-RKK - Splicing Space Piece

153
€3.46
Splice for T-shaped gutter profile with dropper, which is placed on a slope with slope.
Accesories for balcony Profiles

BARA-RKKE - 90 ° exterior angle

153
€51.02
External angle of 90 ° for BARA-RKKE. Pouring profile for T-shaped balconies. The profile keeps edges of tiles and coverings.
Accesories for balcony Profiles

BARA-RKKE - 90 ° internal angle

153
€51.02
90 ° internal angle for T-shaped aluminum pouring water profile with BARA-RKKE drip. The perforated profile protects tile edges.
Accesories for balcony Profiles

BARA-RKKE - External angle of 135 °

153
€51.02
External angle 135 ° for BARA-RKKE. T-shaped aluminum drip profile with water drop. The perforated profile protects and cleans tile edges.
€71.11
Edging profile for exposed edges of surface coverings on balconies and terraces with finished sloped screeds. The exterior leg of the profile is shaped to form a protruding drip lip. Bottom wing gutter and an upper flange for pavement protection.
Accesories for balcony Profiles

BARA-RKB - 90 ° external angle

153
€38.09
External angle 90 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - 90 ° internal angle

153
€38.09
Internal angle 90 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - External angle of 135 °

153
€39.71
External angle 135 ° for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RKB - Splice piece

153
€3.46
Splice for BARA-RKB. T-shaped aluminum pouring profile for coatings. The front is shaped like a drip.
Accesories for balcony Profiles

BARA-RAK - 90 ° external angle

153
€48.58
External angle 90 ° for colored aluminum pouring profile, which is placed on the edge of the terrace or balcony as a drip.
Accesories for balcony Profiles

BARA-RAK - 90 ° internal angle

153
€48.58
Internal angle 90 ° for colored aluminum pouring profile, which is placed on the edge of the terrace or balcony.
Accesories for balcony Profiles

BARA-RAK - External angle of 135 °

153
€53.47
External angle 135 ° for colored aluminum pouring profile. Goterón that is placed on the edge of the terrace or balcony.
Accesories for balcony Profiles

BARA-RAKE - 90 ° external angle

153
€60.49
External angle 90 ° for BARA-RAKE. Profile gutter for balconies with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAKE - 90 ° internal angle

153
€60.49
Internal angle 90 ° for BARA-RAKE. Profile gutter for balconies with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAKE - 135 ° external angle

153
€60.49
External angle 135 ° for BARA-RAKE. Aluminum pouring profile with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAKEG - 90 ° external angle

153
€54.46
External angle 90 ° for BARA-RAKEG. Water pouring profile with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAKEG - 90 ° internal angle

153
€54.46
Internal angle 90 ° for BARA-RAKEG. Water pouring profile with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAKEG - External angle of 135 °

153
€54.46
External angle 135 ° for BARA-RAKEG. Aluminum pouring profile with dropper for placement on a mortar with slope.
Accesories for balcony Profiles

BARA-RAM - 90 ° external angle

153
€40.75
90 ° external angle for color aluminum pouring profile. It is leveled on the edge of the concrete and serves as a topping and leveling of the slope mortar.
Accesories for balcony Profiles

BARA-RAM - 90 ° internal angle

153
€42.18
90 ° internal angle for color aluminum pouring profile. It is leveled on the edge of the concrete and serves as a topping and leveling of the slope mortar.
Accesories for balcony Profiles

BARA-RAM - External angle of 135 °

153
External angle 135 ° for color aluminum pouring profile. It is leveled on the edge of the concrete and serves as a topping and leveling of the slope mortar.
Accesories for balcony Profiles

BARA-RW - 90 ° external angle

153
€27.49
External angle 90 ° for profile gutters in the form of square stainless steel or lacquered aluminum to finish off the edges on balconies and terraces.
Accesories for balcony Profiles

BARA-RW - Splice piece

153
€5.92
Splice for gutter profile in the form of a square of stainless steel or lacquered aluminum to finish off the edges on balconies and terraces.
Accesories for balcony Profiles

BARA-RAP - 90 ° external angle

153
€33.44
External angle 90 ° for BARA-RAP. In combination with the BARA-RW watershed, it serves to limit open sides on balconies and terraces.
Accesories for balcony Profiles

BARA-RAP - Splice piece

153
€7.06
Splicing accessory for BARA-RAP. In combination with the BARA-RW watershed, it serves to limit open sides on balconies and terraces.
Accesories for balcony Profiles

BARA-RKL - 90 ° external angle

153
€81.75
External angle of 90 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RKL - 90 ° internal angle

153
€81.75
Internal angle of 90 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RKL - External angle of 135 °

153
€81.75
External angle of 135 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RKL - Splice part

153
€6.64
Special accessory to tie or splice profiles BARA-RKL. Pouring for balconies with lacquered aluminum drain.
Accesories for balcony Profiles

BARA-RKLT - external angle 90°

153
€85.37
External angle 90 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
Accesories for balcony Profiles

BARA-RKLT - internal angle 90°

153
€85.37
Internal angle 90 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
Accesories for balcony Profiles

BARA-RKLT - external angle 135°

153
€85.37
External angle 135 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
Accesories for balcony Profiles

BARA-RKLT - splice

153
€0.00
Splice for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
Accesories for balcony Profiles

BARA-RTK - Special connection piece

153
€3.04
BARA-RTK is a finishing profile for the exposed edges of the slabs on balconies and terraces built with slopes, which will later be covered with ceramic tiles.
€5.64
Galvanized profile for fixing EPDM type waterproofing membrane. It acts as a linear anchorage in the installation of the waterproofing. Metal profile 2.00 meters long made of 50 mm wide and 1.2 mm thick sheet metal. Available in straight or slotted folded profile. Supplied with 6 mm perforations every 20 cm. 
A removable fleece used to create temporary floor coverings. Made of recycled PET with a self-adhesive coating on the back, REFLEECE measures 1/32” (0.8 mm) thick and is suitable for the application of temporary, removable tile and natural stone coverings. REFLEECE is easy to install and can be removed during deconstruction without causing damage to the...
Product added to wishlist
Product added to compare.