Tiled floors are elegant, easy to maintain, and unlike carpets, do not harbor common allergens and dust mites. Transitions from a tiled floor to other surfaces need to be protected, and floor profiles are designed to ensure a smooth transition, while preventing tile edges from chipping and cracking. We offers a vast selection of floor profiles t...
Tiled floors are elegant, easy to maintain, and unlike carpets, do not harbor common allergens and dust mites. Transitions from a tiled floor to other surfaces need to be protected, and floor profiles are designed to ensure a smooth transition, while preventing tile edges from chipping and cracking. We offers a vast selection of floor profiles that protect tile edges between floor coverings at both equal and lower elevations.
Profile of separation, expansion or movement for pavements. It allows to absorb variations of movement offering good resistance.
Profile with slimm visible side made of aluminium or brass which can be curvable, designed to cover joints and separate floorings. This profile, due to its dimensions, is intended to be installed before or after the tiling. The brass model has two heights available. The profile is perfect to be installed in floorings like marble or terrazzo as it can be...
Flashing, joint or T-shaped profile installed as a transition between adjoining floor coverings of the same height e.g. ceramic tiles or natural stone, parquet flooring, concrete pavers, PVC laminate etc.
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
Embellisher profile for joints. Its assymetrical shape allows laying pieces of different thickness and materials in each side of the profile. The top section covers and decorates the joint among floorings with a perfect finish.
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
Embellisher profile for joints. The top section covers and decorates the joint created by tiles. For its placement, just incrust it into the joint between floorings. It can be placed before or after the flooring. It is available in matt silver and matt gold finishes.
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
Transitions or coverings profile to protect and decorate edges or edges of ceramic tiles and floors. With joint separator between profile and tile.
SCHIENE-V is a corner profile to protect and decorate the edges or edges of parquets or terrazzo.
Finishing profile for tile coverings or other rigid covering materials with a right angled transition from the anchoring leg to the vertical leg and a right angle head design.
Solid brass separation and decoration profile for terrazzo floors. Available in natural brass and can be polished at the same time as the floor.
Transition profile between the ceramic flooring to a carpet of smaller thickness or other coverings. It also protects the edges of the tiles.
Variable height transition profile for the homogeneous union of two coatings at different levels.
Base for variable height transition profile for the homogeneous joining of two coatings at different levels.