Cover joint profiles and fashing profiles that cover the structural joints, absorb movements of the slabs and prevent cracks in the concrete. They are ideal for large constructions (shopping centers, parking lots, airports) and with an easy placement using fixing clips.
Novotapajunta GTA is a flashing profile made of matt silver anodized aluminum, designed to cover joints up to 55 mm wide.
Inexpensive PVC flashing or joint cover plate made of PVC to cover and adapt to structural expansion joints, absorbs movements of slabs or walls and prevents cracks in concrete. They are ideal for large constructions (shopping centers, parking lots, airports) and with an easy placement by means of fixing clips.
The joint cover plate is specially designed to protect and embellish expansion joints on facades, walls, ceilings and floors with light traffic with a width of 50 mm. It is easily installed using the supplied stainless steel clips, avoiding the use of adhesives and hardware.
Flashing, joint or T-shaped profile installed as a transition between adjoining floor coverings of the same height e.g. ceramic tiles or natural stone, parquet flooring, concrete pavers, PVC laminate etc.
Polyethylene foam rod for sealing applications, foam cord for filling or cover, bottom base made of closed cell polyethylene foam, easily compressible, supplied in the form of cords of circular section of various diameters. Serves as a depth limiter for seals in expansion joints. Supplied in whole rolls and long according to measure. (Approximate delivery...
Reinforced corner profile for tiles made of stainless steel AISI 304 overlapped to protect corners and countertops in all types of kitchens, shops and homes. Brushed finish.Ideal for its easy placement with putty or resin. Resistant to the shocks and impacts of cars and friction of use.
Stainless steel corner profile, edge trim or corner tiles for overlapping tiles for decoration or edge protection.It is perfect for rehabilitation or reform work since it does not require doing work for its installation. It is also ideal for the protection of deteriorated or poorly finished edges of old installations.
Corner corners for tiles, corners or overlapping edge for the protection or decoration of edges made of natural, anodized, lacquered or decorated aluminum.
Natural anodized aluminum flashing with butyl adhesive. Designed to protect and beautify expansion joints on facades, walls, ceilings and floors with light traffic with a width between 60 and 140 mm. Also available with drill to screw to the bracket. (Delivery time 7 days approximately)
CJS flashing in shiny stainless steel with side holes for fixing. Designed to cover joints up to 25 mm wide.
Stainless steel cover is a flashing profile made of stainless steel, to cover joints up to 90 mm wide. To place with screws.
The overlapping tapped hole is a brass joint profile, to cover joints up to 60 mm wide. To place with screws.
Stainless steel cover is a flashing profile made of high gloss stainless steel, designed to cover joints up to 25 mm wide.
Flashing profile superimposed with adhesive made of high gloss brass, designed to cover joints up to 25 mm wide.
Novotapajunta GTX is a large flashing or flashing profile in high-gloss stainless steel, designed to cover joints up to 12 cm wide.