Home

BARA-RTKE - splice BARA-RTKE - splice 2
Accesories for balcony Profiles

BARA-RTKE - splice

153
€3.31
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
VINPRO-T - T-shaped profile to transitions of the same height VINPRO-T - T-shaped profile to transitions of the same height 2
Floors profiles

VINPRO-S - U-shaped profile for edge protection

153
€20.45
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
BARA-RTKEG
Balcony Profiles

BARA-RTKEG - Finishing profiles for the exposed edges

153
€98.61
Finishing profiles for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds. Is designed for assemblies with the bonded uncoupling membrane Schlüter DITRA 25. The closed outer edges give the outer perimeter of tiled areas a neat appearance.
BARA-RAK BARA-RAK 2
Balcony Profiles

BARA-RAK - Dripper profile for balcony edge

153
€91.13
Finishing dripper profile for balcony or terrasse edge with drip lip for the exposed edges of balconies and terraces that have an existing sloped screed. The projecting bonding flange is recessed to allow for the use of the Schlüter-RONDEC or Schlüter-JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile.
KERDI-SHOWER-L KERDI-SHOWER-L 2
Polystyrene boards

KERDI-BOARD-ZC - U-shaped stainless steel profile with single perforation

153
€61.54
Brushed stainless steel profile in U-shape with single perforation. Suitable for fixing and mounting Schluter KERDI-BOARD panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for finishing kitchen worktops and utility rooms.
KERDI-SHOWER-L KERDI-SHOWER-L 2
Polystyrene boards

KERDI-BOARD-ZA - U-shaped stainless steel profile with double perforation

153
€61.54
U-shaped stainless steel profile with brushed finish and double perforation. Suitable for fixing and mounting Schluter KERDI-BOARD extruded polystyrene panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for visual finishing in partition walls and shelves.
BARA-RAKEG - Aluminum sheet gutter DITRA 25 BARA-RAKEG - Aluminum sheet gutter DITRA 25 2
Balcony Profiles

BARA-RAKEG - Dripper profile for DITRA 25

153
€99.35
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
BARA-RKL BARA-RKL 2
Balcony Profiles

BARA-RKL - Dripper aluminium profile

153
€143.21
BARA-RKL is a dripper profile with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Novojunta Pro Metal 50 - Aluminum structural expansion joint
Structural expansion joints

Novojunta Pro Metal 50 - Aluminum structural expansion joint

165
€396.90
Structure expansion joints up to 50 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
BARA-RKLT - Dripper aluminium profile
Balcony Profiles

BARA-RKLT - Dripper aluminium profile

153
€168.01
Drainage profile with lacquered aluminum drain openings. It is suitable for laying large raised or gravel / gravel tiles. It has a slot for fixing the Schlüter®-BARIN gutter system.
Linox esquinero inoxidable sobrepuesto Linox esquinero inoxidable sobrepuesto 2
Movement joint

Novojunta 1 - PVC floor expansion joint

165
€13.98
Profile for expansion joints, manufactured in coextruded PVC, formed by body, rigid and flexible, which allows to absorb small variations of movement offering good resistance.
Novojunta 1 - PVC floor expansion joint
Movement joint

Novojunta Decor Flecha - Aluminum floor expansion joint

165
€130.97
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
Home
Product added to wishlist
Product added to compare.