Home

€103.98
Finishing profile for the exposed edges of balconies and terraces that have an existing sloped screed. The projecting bonding flange is recessed to allow for the use of Schlüter JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile.
Profile Accessories

RONDEC-MC - Exterior angle

153
€3.57
Special accessory in exterior angle for corner profile for tiles. Brass profile chrome finish for tile wall corners.
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
Profile Accessories

RONDEC-MC - Internal Angle

153
€3.57
Special internal corner piece for corner tile for RONDEC-MC. Made of chromed brass for the corners of tiled walls.
Profile Accessories

RONDEC-E - external angle

153
€3.63
External angle accessory. Stainless steel profiles for the corners of walls with ceramic coverings, with different finishes.
Edging & outside wall corners profiles

JOLLY-P - Decorative PVC edging profile

153
€6.92
PVC decorative edging profile and skirting covering that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
Profile with slimm visible side made of aluminium or brass which can be curvable, designed to cover joints and separate floorings. This profile, due to its dimensions, is intended to be installed before or after the tiling. The brass model has two heights available. The profile is perfect to be installed in floorings like marble or terrazzo as it can be...
Edging & outside wall corners profiles

Novopared Novosuelo - PVC edge corner profile

165
€4.85
PVC corners for wall or floor economical modern line at right angles as a finish to protect and decorate corners of ceramic tiles.  Profile with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floors or walls between 6 and 12 mm in height.
Profile Accessories

RONDEC-E - internal angle

153
€3.63
Accessory for internal angle for RONDEC-E. Stainless steel profiles for the corners of ceramic walls, with different finishes.
Profile Accessories

RONDEC-E - Lateral closure cap

153
€2.29
Plug or side cover accessory for RONDEC-E. Stainless steel profiles for wall corners with ceramic tiles, with different finishes.
Accesories for balcony Profiles

BARA-RTK - splice

153
€3.12
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTK - external angle 135°

153
€58.15
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
€16.46
90º external angle. Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
Balcony Profiles

BARA-RW - Dripper L-shaped profile

153
€69.83
L-shaped finishing profile made of stainless steel or colour coated aluminium for the exposed edges of balconies and terraces. The profile produces a visually appealing edge finish and protects the exposed edges of the structural slab from weather and corrosion. 
Accesories for balcony Profiles

BARA-RTK - internal angle 90°

153
€52.82
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
€16.46
90º internal angle. Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
Accesories for balcony Profiles

BARA-RTK - external angle 90°

153
€52.82
External angle 90 ° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Edging & outside wall corners profiles

JOLLY-AC - Lacquered aluminum edging profile

153
€16.53
Edging profile that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
€16.46
External angle 135º. Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
€9.31
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
€16.46
135º internal angle. Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
Edging & outside wall corners profiles

RONDEC-A - Anodized aluminum rounded edge profile

153
€23.68
Anodized aluminum rounded profile for ceramic coated wall corners with a spacer to achieve symmetrical joints. Through the spacer, a joint is defined between the profile and the tile. 
Profile Accessories

SCHIENE-STEP-EB - Splice

€14.49
Splicing Angle Decorative stainless steel profile for edges, countertop edges, shelves and stair steps with ceramic coverings.
Accesories for balcony Profiles

BARA-RTP - special splice piece

153
€3.12
Special attachment for gutter profiles placed on edges of existing balconies and terraces, and serves as a support for gutters.
€31.47
Solid brass separation and decoration profile for terrazzo floors. Available in natural brass and can be polished at the same time as the floor.
€127.21
BARA-RKL is a dripper profile with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
€151.86
Drainage profile with lacquered aluminum drain openings. It is suitable for laying large raised or gravel / gravel tiles. It has a slot for fixing the Schlüter®-BARIN gutter system.
Edging & outside wall corners profiles

ECK-E - Stainless steel profile for protecting the outside corners

153
€52.10
Stainless steel edge profile with a wide surface that forms a symmetrically rounded outside corner for the tiled surface with an excellent edge protection in case of mechanical stresses, as well as a clean and decorative finish for the wall corner.
€7.89
Expansion joints or movement joints made of coextruded PVC that allows to absorb movement variations offering good resistance. Model Novojunta 3.
€143.26
Stair nosing profiles with wide non-slip tape (Width 55 mm). Made of brushed stainless steel with a non-slip steppable part. R11 classified according to DIN 51 130.
Edging & outside wall corners profiles

WINKEL - L-shaped solid aluminum profile

153
€21.26
Solid non-perforated angular aluminum profile for different fields of application. It can be used as corners or corners for tiles that receive frequent blows or impacts. As a decorative finish or as a transition profile between orthogonal walls of different materials.
€10.71
Profile for expansion joints, manufactured in coextruded PVC, formed by body, rigid and flexible, which allows to absorb small variations of movement offering good resistance.
Structural expansion joints

DILEX-KS - Expansion joints for ceramics

153
€128.09
Expansion joints or movement joints with edge protection consisting of lateral anchoring legs made of aluminium or stainless steel, which are connected to a replaceable movement zone made of soft rubber.
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
Structural expansion joints

DILEX-EKSB - Ultra thin expansion joints

153
€85.10
Profile for expansion joints or fine and ultrafine movement for pvc or linoleum flooring. Maintenance free and suitable for heavy mechanical wear.
Structural expansion joints

DILEX-KSA - Expansion joints and lateral delivery

153
€76.84
Joint of movement, expansion and lateral delivery of aluminum or stainless steel with flexible soft plastic zone replaceable. The profile’s anchoring legs, made of aluminium or stainless steel, are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window...
Edging & outside wall corners profiles

QUADEC-PQ - Colored PVC square edge profile

153
€7.32
Colored PVC square edge profile model that work as decorative profiles to make corner corners for tiles on walls with ceramic coverings.
Transition profile to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
€17.81
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€17.62
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
€31.81
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Edging & outside wall corners profiles

RONDEC-E - Stainless steel rounded edge profile

153
€42.51
RONDEC-E is a finishing and edgeprotection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge. RONDEC allows for color coordination with tile and grout and the creation of interesting accents in decorative designs. 
Floor and wall bridge joints

DILEX-EKE - Floor or wall meeting board

153
€17.58
DILEX-EKE expansion or meeting board. Flexible plastic profile for corner joints, corners or for the connection between floor and wall.
Edging & outside wall corners profiles

VINPRO-RO - Aluminum round edge profile for elastic coverings

153
€28.93
VINPRO-RO is a high-quality finishing and edge profile made of anodised aluminium for creating elegant external finishing edges on walls with resilient coverings (e.g. LVT coverings). Its contour forms a symmetrically rounded corner. The profile is attached to the wall with suitable screws or a suitable installation adhesive (e.g. Schlüter-KERDI-FIX).
Edging & outside wall corners profiles

ECK-E - 135º stainless steel corners

153
€84.72
Stainless steel edge profile corners 135º open angle for corner protection. Corners for tiles in encounter of non-straight walls with a wide surface that forms a symmetrically rounded outside corner for the tiled surface with an excellent edge protection in case of mechanical stresses, as well as a clean and decorative finish for the wall corner.
Accesories for balcony Profiles

BARA-RKL - External angle of 135 °

153
€81.75
External angle of 135 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RKL - 90 ° internal angle

153
€81.75
Internal angle of 90 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RKL - 90 ° external angle

153
€81.75
External angle of 90 ° for BARA-RKL. Water drain with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Accesories for balcony Profiles

BARA-RW - Splice piece

153
€6.07
Splice for gutter profile in the form of a square of stainless steel or lacquered aluminum to finish off the edges on balconies and terraces.
Accesories for balcony Profiles

BARA-RW - 90 ° external angle

153
€28.78
External angle 90 ° for profile gutters in the form of square stainless steel or lacquered aluminum to finish off the edges on balconies and terraces.
Profile Accessories

QUADEC-MC - angle

153
€4.44
Angle accessory for QUADEC-MC. High quality chrome-plated brass trim profile for outer corners of ceramic clad walls.
Profile Accessories

QUADEC-E - angle

153
€4.50
Angle for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
Profile Accessories

QUADEC-E - plug

153
€2.29
Plug accessory for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
Movement joint

DILEX-HKS - corners

153
€43.32
DILEX-HKS corner accessory. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
Profile Accessories

QUADEC-A - Angle

153
€4.44
Angle for QUADEC-A. High quality anodized aluminum trim profile for exterior corners of walls covered with ceramic tiles.
Profile Accessories

QUADEC-AC - angle

153
€4.44
Angle accessory for QUADEC-AC. High quality anodized aluminum finish profile for exterior corners of ceramic walls.
Profile Accessories

QUADEC-PQ - angle

153
€1.82
Angle accessory for QUADEC-PQ. Colored PVC profile for the external corners and corners in walls with ceramic coverings.
Accesories for balcony Profiles

BARA-RKL - Splice part

153
€6.80
Special accessory to tie or splice profiles BARA-RKL. Pouring for balconies with lacquered aluminum drain.
Profile Accessories

RONDEC-A - external angle

153
€3.57
Accessory for external angle. RONDEC-A is an anodized aluminum profile for wall corners with ceramic coatings.
Profile Accessories

RONDEC-A - internal angle

153
€3.57
Internal angle accessory for RONDEC-A. Anodized aluminum profile for wall corners with ceramic cladding.
€26.55
Transition profile to protect tile edges and provide a smooth transition between vinyl and LVT type flooring coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Profile Accessories

RONDEC-AC - External angle

153
€3.57
External angle accessory for RONDEC-AC. Rounded aluminum corner profile lacquered in colors for the corners of walls with ceramic tiles.
Profile Accessories

RONDEC-AC - Internal Angle

153
€3.57
Internal angle for RONDEC-AC. Rounded aluminum corner bar lacquered in colors for the corners of walls with ceramic tiles.
Profile Accessories

RONDEC-PRO - external angle

153
€1.89
Accessory for external angle. RONDEC-PRO is a decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Accesories for balcony Profiles

BARA-RKLT - external angle 135°

153
€85.37
External angle 135 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
Profile Accessories

RONDEC-PRO - internal angle

153
€1.89
Accessory for internal angle. RONDEC-PRO is a decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Accesories for balcony Profiles

BARA-RKLT - internal angle 90°

153
€85.37
Internal angle 90 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
Profile Accessories

RONDEC-TS - external angle

153
€11.89
RONDEC-TS external angle accessory. Rounded aluminum profile with a surface with relief for the corners of walls with ceramics.
Accesories for balcony Profiles

BARA-RKLT - external angle 90°

153
€85.37
External angle 90 ° for water drain profile with lacquered aluminum drain openings. Suitable for laying large raised or gravel / gravel tiles. With slot for fixing the BARIN gutter system.
Profile Accessories

RONDEC-TS - internal angle

153
€11.89
RONDEC-TS internal angle accessory. Rounded aluminum profile with a surface with relief for the corners of walls with ceramics.
Profile Accessories

RONDEC-PRG - External angle

153
€1.89
RONDEC-PRG - external angle. Decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-PRG - Internal Angle

153
€1.89
RONDEC-PRG - internal angle. Decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Accesories for balcony Profiles

BARA-RTK - Special connection piece

153
€3.12
BARA-RTK is a finishing profile for the exposed edges of the slabs on balconies and terraces built with slopes, which will later be covered with ceramic tiles.
Product added to wishlist
Product added to compare.