Home

FINEC-TS - Ultra slim edge profile
Edging & outside wall corners profiles

FINEC-E - Stainless steel ultra slim edge profile

153
€30.86
Stainless steel high-quality finishing profile for creating external edges of tile coverings or rendered surfaces. Schlüter-FINEC protects the edge of the covering – including glass mosaics – from mechanical damage with a slim, elegant corner formation.
VINPRO-T - T-shaped profile to transitions of the same height VINPRO-T - T-shaped profile to transitions of the same height 2
Floors profiles

VINPRO-S - U-shaped profile for edge protection

153
€24.51
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
JOLLY-TS - Textured finished aluminium edge profile
Edging & outside wall corners profiles

FINEC-TS - Ultra slim edge profile

153
€38.31
High-quality finishing profile for creating external edges of tile coverings or rendered surfaces. Schlüter-FINEC protects the edge of the covering – including glass mosaics – from mechanical damage with a slim, elegant corner formation.
RONDEC-E - ángulo externo
Profile Accessories

RONDEC-E - external angle

153
€3.63
External angle accessory. Stainless steel profiles for the corners of walls with ceramic coverings, with different finishes.
FINEC-TS - Ultra slim edge profile
Edging & outside wall corners profiles

FINEC-A - Ultra slim edge profile

153
€16.77
High-quality finishing profile for creating external edges of tile coverings or rendered surfaces. Schlüter-FINEC protects the edge of the covering – including glass mosaics – from mechanical damage with a slim, elegant corner formation.
RONDEC-E - ángulo interno
Profile Accessories

RONDEC-E - internal angle

153
€3.63
Accessory for internal angle for RONDEC-E. Stainless steel profiles for the corners of ceramic walls, with different finishes.
RONDEC-E - tapón
Profile Accessories

RONDEC-E - Lateral closure cap

153
€2.29
Plug or side cover accessory for RONDEC-E. Stainless steel profiles for wall corners with ceramic tiles, with different finishes.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosepara 5 - Stainless steel profile as a trim in joints floors

165
€99.61
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosepara 5 - Aluminum floor separator profile

165
€27.56
Embellisher profile for joints. Its assymetrical shape allows laying pieces of different thickness and materials in each side of the profile. The top section covers and decorates the joint among floorings with a perfect finish.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosuelo / Novopared - Aluminium Straight Edge Trim

165
€31.90
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
Novosepara 1 - Perfil de separación para pavimentos
Floors profiles

Novosepara 4 - Aluminum T Shaped trim profile

165
€19.96
Embellisher profile for joints. The top section covers and decorates the joint created by tiles. For its placement, just incrust it into the joint between floorings. It can be placed before or after the flooring. It is available in matt silver and matt gold finishes.
DILEX-BT
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€107.19
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
SCHIENE SCHIENE 2
Floors profiles

SCHIENE - Tile corner edge protection profile

153
€14.68
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
KERDI-KERS-R - esquina derecha
Waterproofing membranes

KERDI-KERS-R - Right corner

153
€14.78
Complements of prefabricated welded parts of right corner for waterproofing sheet. For making right corner in work showers.
BARA-RAP BARA-RAP 2
Balcony Profiles

BARA-RAP - Aluminum cover profile

153
€72.96
Cover profile made of colour coated aluminium. Together with the profile Schlüter BARA-RW, it covers the exposed edges of balconies and terraces. Schlüter BARA-RAP is clipped onto this carrier profile and provides a neat finishing edge while protecting the exposed screed edges from deterioration and the weather.
KERDI-KERS-L - esquina izquierda
Waterproofing membranes

KERDI-KERS-L - Left corner

153
€14.78
Accessory of prefabricated welded parts of left corner for KERDI waterproofing sheet special for work showers.
WINKEL
Edging & outside wall corners profiles

WINKEL - L-shaped solid aluminum profile

153
€13.80
Solid non-perforated angular aluminum profile for different fields of application. It can be used as corners or corners for tiles that receive frequent blows or impacts. As a decorative finish or as a transition profile between orthogonal walls of different materials.
Aluminum angle for recessed doormat frame
Entrance matting systems

Angle frame profile for built-in doormat

€54.53
Aluminum angular profile to create perimeter frames for built-in doormats. Available in various height measurements depending on the doormat to be installed. Supply per linear meter of profile.
RAMP RAMP 2
Home

RENO-RAMP - Ramp profile for pavements transition

153
€92.48
Transition profile to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
DILEX-BWB DILEX-BWB 2
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€23.47
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
RONDEC-E RONDEC-E 2
Edging & outside wall corners profiles

RONDEC-E - Stainless steel rounded edge profile

153
€44.16
RONDEC-E is a finishing and edgeprotection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge. RONDEC allows for color coordination with tile and grout and the creation of interesting accents in decorative designs. 
VINPRO-RO - Aluminum round edge profile for elastic coverings VINPRO-RO - Aluminum round edge profile for elastic coverings 2
Edging & outside wall corners profiles

VINPRO-RO - Aluminum round edge profile for elastic coverings

153
€32.35
VINPRO-RO is a high-quality finishing and edge profile made of anodised aluminium for creating elegant external finishing edges on walls with resilient coverings (e.g. LVT coverings). Its contour forms a symmetrically rounded corner. The profile is attached to the wall with suitable screws or a suitable installation adhesive (e.g. Schlüter-KERDI-FIX).
DILEX-EHK DILEX-EHK 2
Floor and wall bridge joints

DILEX-EHK - Cove-shaped sanitary profile

153
€93.37
Stainless steel cove shaped profile for internal wall corners or for floor to wall transitions with high hygienic requirements.
BARA-RAP - empalme BARA-RAP - empalme 2
Accesories for balcony Profiles

BARA-RAP - Splice piece

153
€7.24
Splicing accessory for BARA-RAP. In combination with the BARA-RW watershed, it serves to limit open sides on balconies and terraces.
BARA-RAP - ángulo externo 90° BARA-RAP - ángulo externo 90° 2
Accesories for balcony Profiles

BARA-RAP - 90 ° external angle

153
€33.44
External angle 90 ° for BARA-RAP. In combination with the BARA-RW watershed, it serves to limit open sides on balconies and terraces.
RENO-RAMP - Profil de rampe de transition avec ailes
Accessibility and Safety

VINPRO-U - Ramp profile for vinyl type flooring

153
€28.93
Transition profile to protect tile edges and provide a smooth transition between vinyl and LVT type flooring coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
TROBA-MA TROBA-MA 2
Drainage of bathrooms, balconies and terraces

TROBA-MA - Plate draining sheet

153
€17.57
Draining and protection sheet for waterproofing systems. It is placed under the ceramic coatings placed on gravel (On plates).
TROBA-RO TROBA-RO 2
Drainage of bathrooms, balconies and terraces

TROBA-RO - Draining sheet in rolls

153
€340.67
Draining and protection sheet for waterproofing systems. It is placed under the ceramic coatings placed in gravel (In rolls).
View
TROBA-LINE-TL/H TROBA-LINE-TL/H 2
Drainage of bathrooms, balconies and terraces

TROBA-LINE-TL / H - Height regulator accessory

153
€25.09
Height regulator, which facilitates the installation of TROBA-LINE-TL and TROBA-LINE-TLR perforated drainage channels at varying heights up to 40 mm.
Junta Estructural Basica 20 mm barras 2,5 m Junta Estructural Basica 20 mm barras 2,5 m 2
Structural expansion joints

Novojunta Pro Móvil - Smooth finish structural expansion joint

165
Expansion joint profile for structural movement in aluminum for semi heavy and intense traffic and high load capacity. Due to its design, it admits dimensional movements avoiding cracks as a consequence of the expansion and contraction of the construction elements.
View
FINEC-TS/EN - Corner set
Profile Accessories

FINEC-TS/EN - Corner set

153
€23.90
Corner set accessory for high-quality edging profile for external corners of walls clad with ceramic tiles, vitreous mosaic and plaster finishes. Schlüter-FINEC protects the edge of the cladding, including vitreous mosaic, from mechanical damage and provides an elegant, fine finish.
FINEC-E/ES - Corner set
Profile Accessories

FINEC-E/ES - Corner set

153
€36.21
Corner set accessory for high-quality edging profile for external corners of walls clad with ceramic tiles, vitreous mosaic and plaster finishes. Schlüter-FINEC protects the edge of the cladding, including vitreous mosaic, from mechanical damage and provides an elegant, fine finish.
FINEC-E/ES - Corner set
Profile Accessories

FINEC-A/ES - Corner set made of anodised or lacquered aluminium

153
€19.56
Corner set accessory for high-quality edging profile for external corners of walls clad with ceramic tiles, vitreous mosaic and plaster finishes. Schlüter-FINEC protects the edge of the cladding, including vitreous mosaic, from mechanical damage and provides an elegant, fine finish.
Home
Product added to wishlist
Product added to compare.