Movement joint

Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€99.09
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
Structural expansion joints

DILEX-BTS - Aluminum structural overlay joint

153
€101.46
Aluminum structural joint profile of superimposing in already installed coatings. It makes possible the absorption of movements in three dimensions.
Movement joint

DILEX-BT / MT

153
€53.42
Supporting profile for the sanitation of structural joints, which can be combined with Schlüter®-DILEX-BT / O or RENO-VT in all sizes.
Movement joint

DILEX-BT / OT

153
€20.07
Profile bearing wall of the structural joint and can be combined with any height of Schlüter®-DILEX-BT / MT and -RENO-VT.
Movement joint

DILEX-BT / VTS

153
€26.65
Supporting profile for the sanitation of structural joints, which can be combined with Schlüter®-DILEX-BT / MT.
€376.02
Structure expansion joints up to 50 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
The joint cover plate is specially designed to protect and embellish expansion joints on facades, walls, ceilings and floors with light traffic with a width of 50 mm. It is easily installed using the supplied stainless steel clips, avoiding the use of adhesives and hardware.
€48.03
Inexpensive PVC flashing or joint cover plate made of PVC to cover and adapt to structural expansion joints, absorbs movements of slabs or walls and prevents cracks in concrete. They are ideal for large constructions (shopping centers, parking lots, airports) and with an easy placement by means of fixing clips.
Structural expansion joints

DILEX-KS - Expansion joints for ceramics

153
€52.04
Expansion joints or movement joints with edge protection consisting of lateral anchoring legs made of aluminium or stainless steel, which are connected to a replaceable movement zone made of soft rubber.
Structural expansion joints

DILEX-EKSB - Ultra thin expansion joints

153
€78.14
Profile for expansion joints or fine and ultrafine movement for pvc or linoleum flooring. Maintenance free and suitable for heavy mechanical wear.
Structural expansion joints

DILEX-KSA - Expansion joints and lateral delivery

153
€31.24
Joint of movement, expansion and lateral delivery of aluminum or stainless steel with flexible soft plastic zone replaceable. The profile’s anchoring legs, made of aluminium or stainless steel, are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window...
Structural expansion joints

DILEX-AKWS - Expansion joints for ceramics

153
€49.40
Profile for expansion joints or movement joints with soft PVC band for ceramic tile floors or natural stone. Schlüter DILEX-AKWS is a maintenance- free movement joint profile for tile and natural stone surfaces subject to moderate mechanical stresses.
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€18.34
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
Floor and wall bridge joints

DILEX-AS - Movement joint for shower tray

153
€23.64
Profile for flexible movement or expansion joint and sanitary cove-shaped profile for the delivery or meeting of ceramics with work shower trays, doors and windows.
Movement joint

DILEX-AS - Angle accessory

153
€1.43
Angle accessory for DILEX-AS. Flexible Scottish sanitary profile for delivery to shower trays and door and window frames.
Floor and wall bridge joints

DILEX-EF - Floor or wall meeting board

153
€17.58
Expansion joint or flexible hard / soft plastic meeting as a meeting joint for interior corners between walls or floor / wall delivery.
Floor and wall bridge joints

DILEX-EKE - Floor or wall meeting board

153
€17.58
DILEX-EKE expansion or meeting board. Flexible plastic profile for corner joints, corners or for the connection between floor and wall.
Floor and wall bridge joints

DILEX-HK - Cove-shaped PVC sanitary profile

153
€32.54
Cove-shaped profile sanitary or PVC half-round profile, for floor / wall. Hygiene and sanitary cleaning in the food industry, industrial kitchens or similar.
Movement joint

DILEX-HK - Internal Angle

153
€4.12
DILEX-HK internal angle accessory. PVC half-round profile, floor / wall. Hygiene and cleaning for food industry, kitchens, other applications.
Movement joint

DILEX-HK - External angle

153
€4.12
DILEX-HK external angle accessory. PVC half-round profile, floor / wall. Hygiene and cleaning for food industry, kitchens, other applications.
€3.09
DILEX-HK sanitary right plug accessory. PVC half-round profile, floor / wall. Hygiene in food industry, kitchens, other applications.
€3.09
Accessory cover or cap left for cove-shaped profile sanitary DILEX-HK. PVC half-round profile, floor / wall. Hygiene and cleaning.
Movement joint

DILEX-HKW - Internal Angle

153
€4.12
Internal angle for cove-shaped profile sanitary DILEX-HKW. Half stainless steel rod as flexible movement joint for floor / wall ceramic coverings.
Movement joint

DILEX-HKW - External angle

153
€4.12
External angle for DILEX-HKW. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
€3.09
Plug accessory for DILEX-HKW. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
Movement joint

DILEX-HKS - corners

153
€43.32
DILEX-HKS corner accessory. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
Floor and wall bridge joints

DILEX-EHK - Cove-shaped sanitary profile

153
€71.80
Stainless steel cove shaped profile for internal wall corners or for floor to wall transitions with high hygienic requirements.
€8.13
External angle of 90º for DILEX-EHK. Half-round profile or cove-shaped profile sanitary stainless steel for delivery between floor / wall in ceramics.
€10.57
External angle of 135º for DILEX-EHK. cove-shaped profile sanitary stainless steel to solve meetings and delivery between floor and wall.
Movement joint

DILEX-EHK - 90º internal angle

153
€10.57
90º internal angle for cove-shaped profile sanitary DILEX-EHK. Half stainless steel rod for floor and wall meetings in ceramic coatings.
€10.57
135º internal angle for DILEX-EHK. cove-shaped profile sanitary or half stainless steel rod for delivery between floor / wall in ceramic coatings.
€10.57
Splicing accessory for DILEX-EHK. cove-shaped profile sanitary stainless steel for delivery between floor / wall in ceramic coatings.
€7.95
External angle 90º DILEX-HKU. Stainless steel half round profile. for interior floor / wall corners with high hygienic requirements.
€7.95
External angle 135º DILEX-HKU. Stainless steel half round profile. for interior floor / wall corners with high hygienic requirements.
€7.95
Internal angle 90º for DILEX-HKU. Stainless steel half round profile. for interior floor / wall corners with high hygienic requirements.
€7.95
Internal angle 135º for DILEX-HKU. Stainless steel half round profile. for interior floor / wall corners with high hygienic requirements.
€7.95
Splicing accessory for DILEX-HKU. Stainless steel half round profile. for interior corners between walls with high hygienic requirements.
€3.99
DILEX-HKU interior splicing accessory. Stainless steel half round profile. for corners between walls with high hygienic requirements.
€6.84
DILEX-HKU cap or plug accessory. Stainless steel half round profile. for interior corners between walls with high hygienic requirements.
€25.74
External angle 90º for DILEX-AHK Rondec. Profile of sanitary cove-shaped profile or half aluminum cane for meeting between floor and wall, kitchen countertops.
€25.74
External angle 90º for DILEX-AHK Quadec. cove-shaped profile sanitary or half aluminum cane for floor and wall meetings, kitchen countertops with ceramic tiles.
Movement joint

DILEX-AHK - 90º internal angle

153
€25.74
Internal angle 90º for DILEX-AHK. Aluminum half-round profile for meeting between floor and wall, kitchen countertops with ceramic tiles.
€25.74
135º internal angle for DILEX-AHK. Aluminum half-round profile for meeting between floor and wall, kitchen countertops with ceramic tiles.
€16.52
Cap for DILEX-AHK. Aluminum half-round profile for meeting between floor and wall, kitchen countertops or shelves with a ceramic coating.
Movement joint

DILEX-AHK - Splice Accessory

153
€3.99
Splice for DILEX-AHK. Aluminum half-round profile for meeting between floor and wall, kitchen countertops or shelves with a ceramic coating.
Floor and wall bridge joints

DILEX-AHKA - cove-shaped profile sanitary aluminum

153
€48.45
Coveshaped aluminium profiles for internal wall corners, kitchen worktops, or surfaces with ceramic coverings. Schlüter®-DILEX-AHK/- AHKA profiles are available in a variety of anodised finishes. 
€25.74
External angle 90º for cove-shaped profile sanitary DILEX-AHKA. Aluminum cane half profile for joining floors, walls and kitchen countertops
€25.74
External angle 135º for DILEX-AHKA. Scottish sanitary profile in half aluminum shank for joining floors and walls in a hygienic way.
€25.74
Internal angle 90º for the Scottish sanitary model DILEX-AHKA. Aluminum cane half profile for hygienic joints between floors and walls.
€25.74
135º internal angle for DILEX-AHKA. Profile half cane or cove-shaped profile sanitary aluminum for clean joints between floors and walls.
€16.52
Right cap or cap for cove-shaped profile sanitary DILEX-AHKA. Aluminum half-round profile for joining floors, walls and kitchen countertops.
€16.52
Left cap for DILEX-AHKA. Profile of sanitary cove-shaped profile in half aluminum cane for joining floors and walls in a hygienic and clean way.
Polyethylene foam rod for sealing applications, foam cord for filling or cover, bottom base made of closed cell polyethylene foam, easily compressible, supplied in the form of cords of circular section of various diameters. Serves as a depth limiter for seals in expansion joints. Supplied in whole rolls and long according to measure. (Approximate delivery...
Expansion joint profile for structural movement in aluminum for semi heavy and intense traffic and high load capacity. Due to its design, it admits dimensional movements avoiding cracks as a consequence of the expansion and contraction of the construction elements.
Cover joint profiles

Novosepara 10 - Aluminum cover

165
€24.34
Anodized aluminum cover or joint cover to protect and beautify expansion joints on facades, walls, ceilings and floors.
Gasket bottom, polyethylene foam cord for filling or cover, bottom base made of closed cell polyethylene foam, easily compressible, supplied in the form of cords of circular section of various diameters. Serves as a depth limiter for seals in expansion joints. Supplied in whole rolls and long according to measure. (Approximate delivery time of 7 days)
€75.42
Natural anodized aluminum flashing with butyl adhesive. Designed to protect and beautify expansion joints on facades, walls, ceilings and floors with light traffic with a width between 60 and 140 mm. Also available with drill to screw to the bracket. (Delivery time 7 days approximately)
€393.84
Structure expansion joints up to 60 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas.  DELIVERY TIME 7-10 DAYS APPROXIMATELY
€230.45
Structure expansion joints up to 30 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
€162.03
The Novojunta Pro Basic SP structural expansion joint is an aluminum and EPDM rubber profile intended to be placed in structural joints in a superimposed manner once the installation of the pavement or cladding has been completed. It absorbs stresses and deformations and is suitable for supporting light load traffic.
Product added to wishlist
Product added to compare.