Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Warning: Last items in stock!
WHY CHOOSE US?
Free shipping costs for orders over € 100. Valid for Spain *, Andorra and Portugal *. (* Peninsula only)
SHIPPING IN 48-72 HOURS
We ship all over Europe. Orders received during the day are normally dispatched the next day, to be delivered in 48-72 hours in the Peninsula once they have been dispatched. (Business days from Monday to Friday)
MORE THAN 20 YEARS OF EXPERIENCE
We advise and solve your doubts before, during and after making the purchase, so that you can guess and enjoy your product.
BUY WITH CONFIDENCE
100% safe and protected, you can pay by Card, Paypal and Transfer.
You have 15 days to return your purchase if you are not completely satisfied and 2 years warranty on all our products.
BARA-RTKE/-RTKEG are finishing profiles for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
BARA-RTKE is especially suited for assemblies with the bonded drainage mat DITRA-DRAIN. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
In addition, the profile covers the exposed edges of the bonded drainage mat DITRA-DRAIN, which is installed under the covering. The cross section of the profile openings is sufficiently large to guarantee drainage and ventilation.
The trapezoid perforated anchoring leg of BARA-RTKE is attached to the exposed edges with a dry set tile adhesive. The bonded waterproofing mat KERDI is installed over the perforated anchoring leg and the adhesive flange of the profile with the sealing adhesive KERDI-COLL. If trowel applied bonded waterproofing products are used, the corresponding installation instructions of the manufacturer must be observed.
BARA-RTKEG is designed for assemblies with the bonded uncoupling membrane DITRA 25. The closed outer edges give the outer perimeter of tiled areas a neat appearance.
The bottom edge of the vertical anchoring leg of BARA-RTKE/-RTKEG includes a T-shaped profile chamber for the attachment of the BARIN gutter system. Elongated holes in the BARIN gutter system allow for sloping the gutter assembly.
BARA-RTKE/-RTKEG are made of chromated, colour-coated aluminium.
Material properties and areas of application
The coating on the aluminium profile is colour stable, as well as UV and weather resistant. Visible surfaces should be protected against abrasion. In special cases, the suitability of BARA-RTKE must be verified based on the anticipated chemical and mechanical stresses. BARA-RTKE Finishing profile with T-shaped chamber for the attachment of gutters 5.21 Product data sheet
RTKE/-RTKEG requires no special maintenance or care. The powder coated surface of the aluminium profile is UV resistant and colour stable. Damaged visible surfaces can be restored with paint.
No customer reviews for the moment.