Novobañera 2B PVC - Cove-shaped profile sanitary PVC overlay

Profile made of PVC specially intended to be installed after the tiling process. Prevents moisture and leaks in the joint between the tiled wall and the bathtub or countertop. It absorbs the vibrations of hydromassage systems, avoiding damage in the tiles over time.

Novobañera 2b helps to fulfill with the Spanish Standard UNE-EN 14516:2006 which specifies the requirements and procedure to evaluate the compliance of bathtubs for domestic use and personal hygiene.

Profile of smooth curve made with PVC which facilitates the cleaning and avoids the accumulation of dirt in difficult corners. It also absorbs the vibrations of the hydromassage system. Novobañera® 2b helps to fulfill with the Spanish Standard UNE-EN 14516:2006. This profile has complementary pieces which are available to achieve a perfect finish: internal angle and cover. It is available in white and pergamon beige finishes.

Complementary pieces, cover and angle, are available to get a perfect finish in your installation.

Dimesions

• a: 28 mm
• Long: 2,5 ml

Material

Novobañera 2b is a profile made by coextrusion of PVC-P (rigid PVC) and PVC-U (flexible PVC). PVC-U provides a perfect adaptability to corners while PVC-P is suitable, due to its rigidity, to be the piece to be placed in the tiles as a support.

PVC (polyvinyl chloride), is a polar amorphous thermoplastic polymer highly resistant to abrasion, corrosion and a wide range of chemical products. Has a good resistance to impact, low water absorption, low electrical conductivity and is dimensionally stable.

The complementary piece of Novobañera 2b is made of Zamak. Zamak is a non ferrous alloy of Zinc with aluminium, magnesium and copper (UNE EN 1774). It is tough, has high hardness, high mechanical strength and excellent plastic deformability.

Technical Features and tests

• Fire resistance: M2 (UNE 23-727-90)
• Abrasion resistance: Very good
• Working temperature: -10ºC / 60ºC
• Resistance to chemical agents: Buena excepto con ácido crómico, sulfúrico y disolventes orgánicos como acetato y tolueno / AIM-PLAS

Installation

Please, clean the surface destinated to the installation of Novobañera 2b.

1. Cover generously the back face of Novobañera 2b with an adhesive silicone.
2. Fill also the posterior cavity with the same adhesive to ensure a perfect sealing and good grip.
3. Place the Novobañera 2b on the corner and press firmly ensuring a good contact between both surfaces.
4. Finally clean the remaining material and let dry.

* In humid environments or in direct touch with water, it is recommended to seal the joints between Novobañera with silicones.

Limpieza y mantenimiento

La limpieza se puede realizar con agua y detergente o limpiador específico en disolución. El correcto uso de lejía no le afecta.

No se recomienda el uso de ácido crómico, sulfúrico o disolventes orgánicos como el acetato de etilo, la acetona o el tolueno.

Cleaning and maintenance

The cleaning can be done with water and detergent or specific cleaner diluted. The correct use of bleach do not affect PVC.

It is not recommended using chromic acid, sulfuric acid or organic solvents as ethyl acetate, acetone or toluene.