Search results

Floor and wall bridge joints

DILEX-AHKA - cove-shaped profile sanitary aluminum

153
€48.45
Coveshaped aluminium profiles for internal wall corners, kitchen worktops, or surfaces with ceramic coverings. Schlüter®-DILEX-AHK/- AHKA profiles are available in a variety of anodised finishes. 
€127.21
BARA-RKL is a dripper profile with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
€151.86
Drainage profile with lacquered aluminum drain openings. It is suitable for laying large raised or gravel / gravel tiles. It has a slot for fixing the Schlüter®-BARIN gutter system.
Balcony Profiles

BARIN-SR - Aluminum gutter system

153
€89.11
Lacquered aluminum gutter system for water evacuation on terraces and balconies. They are fixed with the Schlüter BARA profiles.
€28.14
New MaxiDakar rungs are profiles for stair treads or stair nosing designed for the protection of ceramic tread edges made of Maxi material. This material belongs to the family of WPC (Wood Plastic Composites). MAxidakar staircases for stairs incorporate vegetable fibers in their composition.
Transition profile designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Edging & outside wall corners profiles

Novolistel 3 Inox - Stainless steel corner edge profile

165
€57.06
Square section profile, made of AISI304 stainless steel, designed to be placed as a decorative listello, pavement separator, or stair tread, among others. Decorative border with easy installation during tiling.
Edging & outside wall corners profiles

Novolistel 3 Alum - Aluminum corner edge profile

165
€23.14
Square section profile, made of Aluminum, designed to be placed as a decorative listello, pavement separator, or stair tread, among others. Decorative border with easy installation during tiling.
Expansion joint profile for structural movement in aluminum for semi heavy and intense traffic and high load capacity. Due to its design, it admits dimensional movements avoiding cracks as a consequence of the expansion and contraction of the construction elements.
€64.23
Non-slip plate for stair steps. Anodized aluminum plate profile with non-slip tape. R13 certified according to DIN51130 standard. They meet the strictest safety regulations, increasing the safety of any pavement. It is placed on top of the existing tiling. Ideal for public places with a lot of traffic.
Stair nosing to be placed after tiling work, made of anodized aluminum silver matt finish. This profile has a photoluminescent strip useful as a guide in case of darkness. With striated non-slip surface, is very light and easy to install after tiling. Delivered with protective film. Ideal to be placed in public areas.
€75.42
Natural anodized aluminum flashing with butyl adhesive. Designed to protect and beautify expansion joints on facades, walls, ceilings and floors with light traffic with a width between 60 and 140 mm. Also available with drill to screw to the bracket. (Delivery time 7 days approximately)
Embellisher profile for joints. Its assymetrical shape allows laying pieces of different thickness and materials in each side of the profile. The top section covers and decorates the joint among floorings with a perfect finish.
Stainless steel profile intended to be placed as a trim in joints between floors. Due to its geometry, the face side is overlapped in the floor. This avoids to see the grouted joints below and provides a high decorative value. This profile is available in natural finish high brightness. It is delivered with protective film on its surface, to avoid...
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
€623.20
Podotactile paving tiles with high contrast design to the pavement and tactile button pattern, improves accessibility, allows blind or visually impaired people to be alerted to areas with obstacles or areas where there is a change in height or opening without protection. (Pack of 5 units)
€765.04
Podotactile paving tiles with high contrast design to the pavement and tactile button pattern, improves accessibility, allows blind or visually impaired people to be alerted to areas with obstacles or areas where there is a change in height or opening without protection. (Pack of 10 units)
Entrance matting systems

Carpet or doormat with vinyl curl

Vlda
€889.30
Carpet or doormat for entry with loops removes dirty that is easily cleaned. Its PVC composition prevents the development of fungi and bacteria. (9 mm thick. Supplied in rolls of 1.20 m wide and 6.00 m long)
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
€22.77
Transition profile to protect tile edges and provide a smooth transition between vinyl and LVT type flooring coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Expansion joint which consists of a central body made of flexible EPDM and two metal sides. One of the sides acts like a cover plate, hiding the rubber inside. This expansion joint has two different functions: is functional, as it absorbs expansions and contractions, and decorative.
€2.61
Side cover accessory for LED skirting board, profile or listello that can be used as a skirting board made of aluminium for installations with laminated plasterboard or ceramic coating. It allows the installation of a LED lighting strip in the inner recess, giving the profile a double functionality with a high decorative charge thanks to the indirect...
Decorative joints profiles for tiles

Novolistel MaxiSahara - Decorative border square profile

165
€23.08
Square section profile made of PVC with the addition of vegetable fibres from recycled organic waste.Fluted finish that can be installed both indoors and outdoors, providing protection for corners. Available in various colours to provide a solution to multiple trends.
€32.99
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
€17.10
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
Product added to wishlist
Product added to compare.