Search results

Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€99.09
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
Structural expansion joints

DILEX-KS - Expansion joints for ceramics

153
€52.04
Expansion joints or movement joints with edge protection consisting of lateral anchoring legs made of aluminium or stainless steel, which are connected to a replaceable movement zone made of soft rubber.
Structural expansion joints

DILEX-EKSB - Ultra thin expansion joints

153
€78.14
Profile for expansion joints or fine and ultrafine movement for pvc or linoleum flooring. Maintenance free and suitable for heavy mechanical wear.
Structural expansion joints

DILEX-AKWS - Expansion joints for ceramics

153
€49.40
Profile for expansion joints or movement joints with soft PVC band for ceramic tile floors or natural stone. Schlüter DILEX-AKWS is a maintenance- free movement joint profile for tile and natural stone surfaces subject to moderate mechanical stresses.
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€18.34
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
€357.95
Structure expansion joints up to 50 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
Expansion joint profile for structural movement in aluminum for semi heavy and intense traffic and high load capacity. Due to its design, it admits dimensional movements avoiding cracks as a consequence of the expansion and contraction of the construction elements.
Elastomeric structural expansion joint for bridges measuring 220x1835x35. High resistance to abrasion and temperature changes. Structural opening of 52 mm and maximum movement of +/- 26mm.(Delivery time: 20 business days)
€466.99
Expansion joint for bridges made of 210x1835x34 elastomer. Good resistance to abrasion and temperature variations. For 40mm opening joints and maximum movement of +/- 21mm.(Delivery time: 20 working days)
€374.89
Structure expansion joints up to 60 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas.  DELIVERY TIME 7-10 DAYS APPROXIMATELY
€219.35
Structure expansion joints up to 30 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
€154.24
The Novojunta Pro Basic SP structural expansion joint is an aluminum and EPDM rubber profile intended to be placed in structural joints in a superimposed manner once the installation of the pavement or cladding has been completed. It absorbs stresses and deformations and is suitable for supporting light load traffic.
Structural expansion joints

DILEX-KSA - Expansion joints and lateral delivery

153
€31.24
Joint of movement, expansion and lateral delivery of aluminum or stainless steel with flexible soft plastic zone replaceable. The profile’s anchoring legs, made of aluminium or stainless steel, are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window...
€7.85
Expansion joints or movement joints made of coextruded PVC that allows to absorb movement variations offering good resistance. Model Novojunta 3.
€10.48
Profile for expansion joints, manufactured in coextruded PVC, formed by body, rigid and flexible, which allows to absorb small variations of movement offering good resistance.
Expansion joints profile made with aluminum for floors applications, has arrow shape, so it is specially indicated for high thickness floorings. Consists of two metal profiles with a flexible EPDM rubber inside.
Expansion joint which consists of a central body made of flexible EPDM and two metal sides. One of the sides acts like a cover plate, hiding the rubber inside. This expansion joint has two different functions: is functional, as it absorbs expansions and contractions, and decorative.
Structural expansion joints

EPDM rubber sealing membrane

165
€299.47
EPDM rubber membrane with built-in adhesive to seal expansion joints that require sealing. Maybe placed as a complement to a system for expansion joint profiles or as a loose product.
Structural expansion joints

DILEX-BTS - Aluminum structural overlay joint

153
€101.46
Aluminum structural joint profile of superimposing in already installed coatings. It makes possible the absorption of movements in three dimensions.
Structural expansion joints

Firestop cord as a barrier against flames

165
€32.70
The main function of this cord is to act as a barrier against flames, smoke and hot or flammable gases in case of fire, preventing its propagation to the rest of the installation. Classification of reaction to fire M0 / A1 S1 (EN 13501:2:2016), and a fire resistance of 240 minutes (EN 1366-4).
€10.02
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
Floor and wall bridge joints

DILEX-EF - Floor or wall meeting board

153
€17.58
Expansion joint or flexible hard / soft plastic meeting as a meeting joint for interior corners between walls or floor / wall delivery.
Floor and wall bridge joints

DILEX-EKE - Floor or wall meeting board

153
€17.58
DILEX-EKE expansion or meeting board. Flexible plastic profile for corner joints, corners or for the connection between floor and wall.
€47.56
Inexpensive PVC flashing or joint cover plate made of PVC to cover and adapt to structural expansion joints, absorbs movements of slabs or walls and prevents cracks in concrete. They are ideal for large constructions (shopping centers, parking lots, airports) and with an easy placement by means of fixing clips.
Joints and profiles for concrete

PVC band with bulb for internal seal

€227.35
Bands made of high quality PVC for expansion joints of deposits or areas subject to permanent humidity. They have a central bulb to allow deformation and displacement of the joint.(Bulky material - approximate delivery time of 7 days)(On request measures 300, 360 and 440 mm)
Joints and profiles for concrete

Hydroexpansive profile - 8m roll

€45.39
Hydroexpansive profile based on polyethylene, butyl rubber, resin and elastomeric binders. Gradual and controlled expansion on contact with water
The joint cover plate is specially designed to protect and embellish expansion joints on facades, walls, ceilings and floors with light traffic with a width of 50 mm. It is easily installed using the supplied stainless steel clips, avoiding the use of adhesives and hardware.
Joints and profiles for concrete

Novojunta concrete 40 - PVC Concrete Joint rule

€318.42
40 mm high hollow PVC joint rule profile for concrete joints that absorbs the expansion of concrete in screeds.It allows the cracking of concrete screeds, avoiding cutting with a disc on the back.Supplied in packs of 60 bars 2.5 m each, 150 m in total.(Approximate delivery time 7 days).
Polyethylene foam rod for sealing applications, foam cord for filling or cover, bottom base made of closed cell polyethylene foam, easily compressible, supplied in the form of cords of circular section of various diameters. Serves as a depth limiter for seals in expansion joints. Supplied in whole rolls and long according to measure. (Approximate delivery...
Skirting and coved-shaped profiles

Novorodapie L - Anodized aluminum skirting board

165
€48.36
Aluminum skirting board or decorative plinth profile, with an elegant simple design. Metal skirting board with straight lines, easy and quick installation. The profile contoured ends give a snug fit on the wall covering over the bottom perimeter along the dilatation gap joint, thus ensuring the necessary expansion movement to the floor.
Cover joint profiles

Novosepara 10 - Aluminum cover

165
€23.53
Anodized aluminum cover or joint cover to protect and beautify expansion joints on facades, walls, ceilings and floors.
€75.42
Natural anodized aluminum flashing with butyl adhesive. Designed to protect and beautify expansion joints on facades, walls, ceilings and floors with light traffic with a width between 60 and 140 mm. Also available with drill to screw to the bracket. (Delivery time 7 days approximately)
Joints and profiles for concrete

PVC band with bulb for external joint

€402.14
Bands made of high quality PVC for expansion joints of deposits or areas subject to permanent humidity. They have an external bulb to allow deformation and displacement of the joint.(Bulky material - approximate delivery time of 7 days)
Joints and profiles for concrete

Flat PVC band for internal roll joint

€291.86
Flat PVC band for high quality internal joint for expansion joints of deposits or areas subject to permanent moisture. They have an external bulb to allow deformation and displacement of the joint.(Bulky material - approximate delivery time of 7 days)
Joints and profiles for concrete

Flat PVC band for external roll joint

Flat PVC band for high quality external joint for expansion joints of deposits or areas subject to permanent moisture. They have an external bulb to allow deformation and displacement of the joint.(Bulky material - approximate delivery time of 7 days)
Floor and wall bridge joints

DILEX-AS - Movement joint for shower tray

153
€23.64
Profile for flexible movement or expansion joint and sanitary cove-shaped profile for the delivery or meeting of ceramics with work shower trays, doors and windows.
Waterproofing membranes

KERDI-FIX - Elastic polymer based adhesive

153
€22.66
KERDI-FIX - 290 ml. Elastic adhesive based on polymers. Suitable for bonding and waterproofing deliveries of the Schlüter®-KERDI waterproofing sheet.
€42.26
Stair nosing made of Maxi, an exclusive raw material of WPC (Wood Plastic Composite) family of products. Its particular geometry and appearance contribute to embellish all kind of stairs, specially the rustic ones, being the perfect alternative to natural wood profiles.
€28.14
New MaxiDakar rungs are profiles for stair treads or stair nosing designed for the protection of ceramic tread edges made of Maxi material. This material belongs to the family of WPC (Wood Plastic Composites). MAxidakar staircases for stairs incorporate vegetable fibers in their composition.
Floors profiles

SCHIENE-ES - Tile corner profile

153
€28.17
Transitions or coverings profile to protect and decorate edges or edges of ceramic tiles and floors. With joint separator between profile and tile.
Gasket bottom, polyethylene foam cord for filling or cover, bottom base made of closed cell polyethylene foam, easily compressible, supplied in the form of cords of circular section of various diameters. Serves as a depth limiter for seals in expansion joints. Supplied in whole rolls and long according to measure. (Approximate delivery time of 7 days)
Stair nosing profile made of an extra resistant polymer specially developed to obtain the bestbenefits in all kind of environments. Not only indoors but also in submerged or humid environmentsor outdoors. Thanks to the addition of biocides, which prevent from mold growing, it stands stable inhumid and submerged environments.
€32.99
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
€17.10
Corner edging profile to protect and decorate the edges of parquet or other coverings, e.g. terrazzo. The transition between the fixing side and the edging side is rectangular. In addition, the even edging side is suitable for sanding.
Skirting and coved-shaped profiles

Novorodapie Maxi - Skirting board for technical raised floors

165
€113.73
Skirting board, socket or profile designed to be installed as a finish off for technical raised floors interraces, balconies, runways, swimmingpool floors, etc. Delivered in kit with all the necessary elements for the installation and its adjustment during the installation work. Fits with any kind of plot for raised floors and has a quick and easy...
€51.32
Novopeldaño MaxiTokyo is a stair nosing made of Maxi, an exclusive raw material of WPC (Wood Plastic Composite) family of products. Its particular geometry and appearance contribute to embellish all kind of stairs, specially the rustic ones, being the perfect alternative to natural wood profiles.d of stairs, specially the rustic ones, being the perfect...
Product added to wishlist
Product added to compare.