Flexible vinyl resin skirting board 60/120

Flexible vinyl resin (PVC) skirting board (50 meter roll). Its flexibility and robustness make it a highly functional profile. PVC skirting with a hatch finish makes it easy to clean, avoiding germs. Six colors available for the creation of a skirting board combined with the floor or wall. Adheres with polyurethane mastic or contact glue.

60 or 120 mm high skirting board with good resistance to chemical agents with graining on the back for better adhesion with glue. Only the 60 mm high version has angle and corner. Suitable for indoor use.

Translated with www.DeepL.com/Translator (free version)

Dimensions

• H=60 / 120 mm.
• Length: Roll of 50 meters.

Colors

• B - White
• GC - Light gray
• GS - Dark gray
• T - Dark brown
• M - Brown
• N - Black

Applications

Profile designed for installation as a skirting board. This profile is made of flexible PVC, which gives it superior resistance while maintaining a certain degree of flexibility.
The properties of the material and its smooth surface make it a perfect choice in places subject to regular and aggressive cleaning. Due to its size, geometry and characteristics, it is a perfect solution for hospitals or day-care centers.
This PVC skirting is suitable for indoor installation. The profile has not been developed to withstand UV rays, so its installation outdoors may cause color fading or yellowing.

Materials

Flexible, non-toxic PVC (polyvinyl chloride).

PVC (polyvinyl chloride) is an amorphous polar thermoplastic polymer with high resistance to abrasion, corrosion and a wide range of chemicals, including common cleaners. It has good impact resistance, low water absorption, low electrical conductivity and is dimensionally stable.

Installation

Simple installation profile requires no additional hardware.

1. Clean the support where the skirting board is to be installed and check that the profile is in good condition.
2. Apply part of the adhesive to the wall. Then also apply a part of the adhesive to the back side of the profile. You can use contact glue or commercially available quick assembly adhesives. Make sure that the adhesive is suitable for PVC adhesive bonding.
3. Adhere the profile to the wall and press to ensure optimum adhesion.
4. Remove any adhesive residue and allow to dry.

Cleaning and maintenance

Cleaning can be done with water and detergent or specific cleaning solution. The correct use of bleach or stronger cleaners on the market does not affect it. In case of doubt, always use the diluted cleaner and test in a less visible area. The use of chromic acid, sulfuric acid or organic solvents such as ethyl acetate, acetone or toluene is not recommended.