Search results

€91.13
Finishing dripper profile for balcony or terrasse edge with drip lip for the exposed edges of balconies and terraces that have an existing sloped screed. The projecting bonding flange is recessed to allow for the use of the Schlüter-RONDEC or Schlüter-JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile.
Edging & outside wall corners profiles

FINEC-TS - Ultra slim edge profile

153
€35.70
High-quality finishing profile for creating external edges of tile coverings or rendered surfaces. Schlüter-FINEC protects the edge of the covering – including glass mosaics – from mechanical damage with a slim, elegant corner formation.
Edging & outside wall corners profiles

FINEC-A - Ultra slim edge profile

153
€15.87
High-quality finishing profile for creating external edges of tile coverings or rendered surfaces. Schlüter-FINEC protects the edge of the covering – including glass mosaics – from mechanical damage with a slim, elegant corner formation.
Edging & outside wall corners profiles

FINEC-E - Stainless steel ultra slim edge profile

153
€26.13
Stainless steel high-quality finishing profile for creating external edges of tile coverings or rendered surfaces. Schlüter-FINEC protects the edge of the covering – including glass mosaics – from mechanical damage with a slim, elegant corner formation.
€58.44
Stair nosing profiles with wide non-slip tape (Width 55 mm). Made of brushed stainless steel with a non-slip steppable part. R11 classified according to DIN 51 130.
Waterproofing membranes

KERDI-FIX - Elastic polymer based adhesive

153
€22.66
KERDI-FIX - 290 ml. Elastic adhesive based on polymers. Suitable for bonding and waterproofing deliveries of the Schlüter®-KERDI waterproofing sheet.
Edging & outside wall corners profiles

VINPRO-RO - Aluminum round edge profile for elastic coverings

153
€23.94
VINPRO-RO is a high-quality finishing and edge profile made of anodised aluminium for creating elegant external finishing edges on walls with resilient coverings (e.g. LVT coverings). Its contour forms a symmetrically rounded corner. The profile is attached to the wall with suitable screws or a suitable installation adhesive (e.g. Schlüter-KERDI-FIX).
Profile Accessories

FINEC-TS/EN - Corner set

153
€23.90
Corner set accessory for high-quality edging profile for external corners of walls clad with ceramic tiles, vitreous mosaic and plaster finishes. Schlüter-FINEC protects the edge of the cladding, including vitreous mosaic, from mechanical damage and provides an elegant, fine finish.
Profile Accessories

FINEC-E/ES - Corner set

153
€36.21
Corner set accessory for high-quality edging profile for external corners of walls clad with ceramic tiles, vitreous mosaic and plaster finishes. Schlüter-FINEC protects the edge of the cladding, including vitreous mosaic, from mechanical damage and provides an elegant, fine finish.
Corner set accessory for high-quality edging profile for external corners of walls clad with ceramic tiles, vitreous mosaic and plaster finishes. Schlüter-FINEC protects the edge of the cladding, including vitreous mosaic, from mechanical damage and provides an elegant, fine finish.
€10.02
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
Finishing aluminium profile for edge protection in floor coverings adjoin carpet or coverings of a similar thickness or as a finishing profile for the edges of wall coverings. (e.g. LVT flooring and laminate, parquet etc.).
Transition profile to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Embedded stair profile

TREP-B - Anti-slip stair nosing trim

153
€27.84
Stair nosing profile made in alumminium with anti slip tread insert of a rigid PVC and soft PVC slip resistant surface. Stair edging profile for tiles for technical effective, practical and long-lasting solutions in the stairnosing finishes, according to the most recent UE safety standards which provide proper anti-slip elements.
Embedded stair profile

TREP-S - Rung profiles with non-slip rubber

153
€20.35
Stair nosing profile made in alumminium with anti slip tread insert of a rigid PVC and soft PVC slip resistant surface. Stair edging profile for tiles for technical effective, practical and long-lasting solutions in the stairnosing finishes, according to the most recent UE safety standards which provide proper anti-slip elements.
Floor and wall bridge joints

DILEX-AHKA - cove-shaped profile sanitary aluminum

153
€48.45
Coveshaped aluminium profiles for internal wall corners, kitchen worktops, or surfaces with ceramic coverings. Schlüter®-DILEX-AHK/- AHKA profiles are available in a variety of anodised finishes. 
Floors profiles

SCHIENE-ES - Tile corner profile

153
€28.17
Transitions or coverings profile to protect and decorate edges or edges of ceramic tiles and floors. With joint separator between profile and tile.
€22.77
Transition profile to protect tile edges and provide a smooth transition between vinyl and LVT type flooring coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
A removable fleece used to create temporary floor coverings. Made of recycled PET with a self-adhesive coating on the back, REFLEECE measures 1/32” (0.8 mm) thick and is suitable for the application of temporary, removable tile and natural stone coverings. REFLEECE is easy to install and can be removed during deconstruction without causing damage to the...
Movement joint

DILEX-BT / MT

153
€53.42
Supporting profile for the sanitation of structural joints, which can be combined with Schlüter®-DILEX-BT / O or RENO-VT in all sizes.
Movement joint

DILEX-BT / OT

153
€20.07
Profile bearing wall of the structural joint and can be combined with any height of Schlüter®-DILEX-BT / MT and -RENO-VT.
Movement joint

DILEX-BT / VTS

153
€26.65
Supporting profile for the sanitation of structural joints, which can be combined with Schlüter®-DILEX-BT / MT.
Structural expansion joints

DILEX-AKWS - Expansion joints for ceramics

153
€49.40
Profile for expansion joints or movement joints with soft PVC band for ceramic tile floors or natural stone. Schlüter DILEX-AKWS is a maintenance- free movement joint profile for tile and natural stone surfaces subject to moderate mechanical stresses.
Edging & outside wall corners profiles

JOLLY-P - Decorative PVC edging profile

153
€6.92
PVC decorative edging profile and skirting covering that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
Edging & outside wall corners profiles

QUADEC-PQ - Colored PVC square edge profile

153
€7.32
Colored PVC square edge profile model that work as decorative profiles to make corner corners for tiles on walls with ceramic coverings.
Edging & outside wall corners profiles

RONDEC-E - Stainless steel rounded edge profile

153
€14.42
RONDEC-E is a finishing and edgeprotection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge. RONDEC allows for color coordination with tile and grout and the creation of interesting accents in decorative designs. 
Edging & outside wall corners profiles

RONDEC-A - Anodized aluminum rounded edge profile

153
€16.58
Anodized aluminum rounded profile for ceramic coated wall corners with a spacer to achieve symmetrical joints. Through the spacer, a joint is defined between the profile and the tile. 
Edge countertop profiles

RONDEC-STEP - Aluminum worktop corners

153
€66.45
Decorative profiles for the protection of the edges and edges of kitchen countertops. Aluminum profiles with a smooth finish for shelves and kitchens.
Edging & outside wall corners profiles

ECK-E - Stainless steel profile for protecting the outside corners

153
€56.36
Stainless steel edge profile with a wide surface that forms a symmetrically rounded outside corner for the tiled surface with an excellent edge protection in case of mechanical stresses, as well as a clean and decorative finish for the wall corner.
Edging & outside wall corners profiles

ECK-E - 135º stainless steel corners

153
€91.72
Stainless steel edge profile corners 135º open angle for corner protection. Corners for tiles in encounter of non-straight walls with a wide surface that forms a symmetrically rounded outside corner for the tiled surface with an excellent edge protection in case of mechanical stresses, as well as a clean and decorative finish for the wall corner.
Edging & outside wall corners profiles

ECK-K - 135º stainless steel edge profile

153
€51.36
Stainless steel edge profile corners 135º open angle for corner protection. Overlapping corners for stainless steel tiles at 135º open angle for subsequent placement in corners of the walls with ceramic tiles.
Embedded stair profile

TREP-TAP - Smooth stair step covering

153
€13.66
Smooth coating on profiles for steps or stairwells of stairs for TREP-TAP stairs that adapts to the aluminum or stainless steel profile.
Embedded stair profile

TREP-TAP-R - Embossed stair step covering

153
€21.34
Embossed coating on profiles for steps or stairwells of stairs for TREP-TAP-R stairs that adapts to the aluminum or stainless steel profile.
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€99.09
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
Structural expansion joints

DILEX-BTS - Aluminum structural overlay joint

153
€101.46
Aluminum structural joint profile of superimposing in already installed coatings. It makes possible the absorption of movements in three dimensions.
Structural expansion joints

DILEX-KS - Expansion joints for ceramics

153
€52.04
Expansion joints or movement joints with edge protection consisting of lateral anchoring legs made of aluminium or stainless steel, which are connected to a replaceable movement zone made of soft rubber.
Structural expansion joints

DILEX-EKSB - Ultra thin expansion joints

153
€78.14
Profile for expansion joints or fine and ultrafine movement for pvc or linoleum flooring. Maintenance free and suitable for heavy mechanical wear.
Structural expansion joints

DILEX-KSA - Expansion joints and lateral delivery

153
€31.24
Joint of movement, expansion and lateral delivery of aluminum or stainless steel with flexible soft plastic zone replaceable. The profile’s anchoring legs, made of aluminium or stainless steel, are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window...
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€18.34
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
Transition profile designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
€30.71
Solid brass separation and decoration profile for terrazzo floors. Available in natural brass and can be polished at the same time as the floor.
Edging & outside wall corners profiles

WINKEL - L-shaped solid aluminum profile

153
€13.80
Solid non-perforated angular aluminum profile for different fields of application. It can be used as corners or corners for tiles that receive frequent blows or impacts. As a decorative finish or as a transition profile between orthogonal walls of different materials.
Profile Accessories

QUADEC-E - angle

153
€4.50
Angle for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
Profile Accessories

QUADEC-E - plug

153
€2.29
Plug accessory for QUADEC-E. High quality stainless steel finish profile for exterior corners of walls lined with ceramic tiles.
Profile Accessories

QUADEC-A - Angle

153
€4.44
Angle for QUADEC-A. High quality anodized aluminum trim profile for exterior corners of walls covered with ceramic tiles.
Profile Accessories

QUADEC-TS - angle

153
€11.89
Angle for QUADEC-TS. High quality aluminum trim profile with relief for exterior corners of walls covered with ceramic tiles.
Profile Accessories

QUADEC-FS - angle

153
€29.97
Angle accessory for QUADEC-FS. Decorative profile, which allows the insertion of borders or ceramic strips.
Profile Accessories

QUADEC-MC - angle

153
€4.44
Angle accessory for QUADEC-MC. High quality chrome-plated brass trim profile for outer corners of ceramic clad walls.
Profile Accessories

QUADEC-AC - angle

153
€4.44
Angle accessory for QUADEC-AC. High quality anodized aluminum finish profile for exterior corners of ceramic walls.
Profile Accessories

QUADEC-PQ - angle

153
€1.82
Angle accessory for QUADEC-PQ. Colored PVC profile for the external corners and corners in walls with ceramic coverings.
Profile Accessories

RONDEC-MC - Exterior angle

153
€3.57
Special accessory in exterior angle for corner profile for tiles. Brass profile chrome finish for tile wall corners.
Profile Accessories

RONDEC-MC - Internal Angle

153
€3.57
Special internal corner piece for corner tile for RONDEC-MC. Made of chromed brass for the corners of tiled walls.
Profile Accessories

RONDEC-E - external angle

153
€3.63
External angle accessory. Stainless steel profiles for the corners of walls with ceramic coverings, with different finishes.
Profile Accessories

RONDEC-E - internal angle

153
€3.63
Accessory for internal angle for RONDEC-E. Stainless steel profiles for the corners of ceramic walls, with different finishes.
Profile Accessories

RONDEC-E - Lateral closure cap

153
€2.29
Plug or side cover accessory for RONDEC-E. Stainless steel profiles for wall corners with ceramic tiles, with different finishes.
Profile Accessories

RONDEC-E - Special splice piece

153
€2.20
RONDEC-E and SCHIENE-E splicing accessory. Stainless steel profiles for the corners of walls with ceramic coverings, with different finishes.
Profile Accessories

RONDEC-A - external angle

153
€3.57
Accessory for external angle. RONDEC-A is an anodized aluminum profile for wall corners with ceramic coatings.
Profile Accessories

RONDEC-A - internal angle

153
€3.57
Internal angle accessory for RONDEC-A. Anodized aluminum profile for wall corners with ceramic cladding.
Profile Accessories

RONDEC-A - splice

153
€1.18
RONDEC-A splicing accessory. Anodized aluminum profile for wall corners with ceramic cladding.
Profile Accessories

RONDEC-AC - External angle

153
€3.57
External angle accessory for RONDEC-AC. Rounded aluminum corner profile lacquered in colors for the corners of walls with ceramic tiles.
Profile Accessories

RONDEC-AC - Internal Angle

153
€3.57
Internal angle for RONDEC-AC. Rounded aluminum corner bar lacquered in colors for the corners of walls with ceramic tiles.
Profile Accessories

RONDEC-TS - external angle

153
€11.89
RONDEC-TS external angle accessory. Rounded aluminum profile with a surface with relief for the corners of walls with ceramics.
Profile Accessories

RONDEC-TS - internal angle

153
€11.89
RONDEC-TS internal angle accessory. Rounded aluminum profile with a surface with relief for the corners of walls with ceramics.
Profile Accessories

RONDEC-PRO - external angle

153
€1.89
Accessory for external angle. RONDEC-PRO is a decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-PRO - internal angle

153
€1.89
Accessory for internal angle. RONDEC-PRO is a decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-PRG - External angle

153
€1.89
RONDEC-PRG - external angle. Decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-PRG - Internal Angle

153
€1.89
RONDEC-PRG - internal angle. Decorative profile, rounded, to protect and give good finish to the corners of ceramic tiles.
Profile Accessories

RONDEC-STEP-CT - External angle of 90º

153
€29.78
External angle of 90º for aluminum corner profile RONDEC-STEP-CT for edge protection for kitchen countertops with ceramic coverings.
Profile Accessories

RONDEC-STEP-CT - Internal angle of 90º

153
€29.78
Internal angle of 90º for corner profile or countertop guard RONDEC-STEP-CT for protection of edges or edges of kitchen countertops.
Profile Accessories

RONDEC-STEP-CT - 135º internal angle

153
€29.78
Internal angle of 135º for RONDEC-STEP-CT corner profile. Aluminum profile for edge protection on kitchen countertops with ceramic coatings.
€29.78
Internal angle 90º for RONDEC-STEP. Profile for singing countertops and ceramic tile steps. For the singing of countertops and ceramic steps.
Profile Accessories

RONDEC-STEP - 135º internal angle

153
€29.78
Internal angle 135 for RONDEC-STEP aluminum corner. Edge protection profile of ceramic countertops and steps.
Decorative joints profiles for tiles

RONDEC-DB - Decorative aluminum borders

153
€20.98
Decorative borders, aluminum profiles or listels for kitchens and bathrooms RONDEC-DB model. Decorative lists with rounded shape.
Profile Accessories

DIADEC - external angle

153
€24.10
External angle accessory for DIADEC. Anodized aluminum trim profile for exterior corners of walls and finishes of ceramic coatings.
Profile Accessories

INDEC - External angle

153
€4.65
External angle accessory for INDEC. Profile of anodized aluminum corners for exterior corners of walls and finishes of ceramic coatings.
Profile Accessories

ECK-KHK - stainless steel splice

153
€7.76
Junction fitting for stainless steel cove-shaped profile ECK-KHK. Profile for subsequent mounting to the inner corners of ceramic and cladding.
Accessories for stair steps

TREP-B - Cap or plug accessory

153
€2.04
TREP-B plug accessory. Aluminum or stainless steel profiles for steps, with a replaceable stepped surface of non-slip synthetic rubber.
Accessories for stair steps

TREP-B - Replacement rubber

153
€18.70
TREP-B rubber replacement. Aluminum or stainless steel profiles for steps, with a replaceable stepped surface of non-slip synthetic rubber.
Accessories for stair steps

TREP-S - Cap or plug accessory

153
€1.24
TREP-S cap or cap accessory. Aluminum or stainless steel profiles for rungs, with replaceable stepped surface of non-slip synthetic rubber.
Accessories for stair steps

TREP-S - Spare rubber accessory part

153
€15.85
TREP-S replacement rubber. Aluminum or stainless steel profiles for steps, with a replaceable stepped surface of non-slip synthetic rubber.
Accessories for stair steps

TREP-E - plug

153
€2.49
Plug accessory for TREP-E. Stainless steel profile for non-slip steps.
Accessories for stair steps

TREP-FL - plug

153
€2.42
Plug accessory for TREP-FL. Aluminum or stainless steel ladder profile in non-slip Florentine shape for safe construction. .
Floor and wall bridge joints

DILEX-AS - Movement joint for shower tray

153
€23.64
Profile for flexible movement or expansion joint and sanitary cove-shaped profile for the delivery or meeting of ceramics with work shower trays, doors and windows.
Movement joint

DILEX-AS - Angle accessory

153
€1.43
Angle accessory for DILEX-AS. Flexible Scottish sanitary profile for delivery to shower trays and door and window frames.
Floor and wall bridge joints

DILEX-EF - Floor or wall meeting board

153
€17.58
Expansion joint or flexible hard / soft plastic meeting as a meeting joint for interior corners between walls or floor / wall delivery.
Floor and wall bridge joints

DILEX-EKE - Floor or wall meeting board

153
€17.58
DILEX-EKE expansion or meeting board. Flexible plastic profile for corner joints, corners or for the connection between floor and wall.
Movement joint

DILEX-HK - Internal Angle

153
€4.12
DILEX-HK internal angle accessory. PVC half-round profile, floor / wall. Hygiene and cleaning for food industry, kitchens, other applications.
Movement joint

DILEX-HK - External angle

153
€4.12
DILEX-HK external angle accessory. PVC half-round profile, floor / wall. Hygiene and cleaning for food industry, kitchens, other applications.
€3.09
DILEX-HK sanitary right plug accessory. PVC half-round profile, floor / wall. Hygiene in food industry, kitchens, other applications.
€3.09
Accessory cover or cap left for cove-shaped profile sanitary DILEX-HK. PVC half-round profile, floor / wall. Hygiene and cleaning.
Movement joint

DILEX-HKW - Internal Angle

153
€4.12
Internal angle for cove-shaped profile sanitary DILEX-HKW. Half stainless steel rod as flexible movement joint for floor / wall ceramic coverings.
Movement joint

DILEX-HKW - External angle

153
€4.12
External angle for DILEX-HKW. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
€3.09
Plug accessory for DILEX-HKW. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
Movement joint

DILEX-HKS - corners

153
€43.32
DILEX-HKS corner accessory. Stainless steel half-round profile as a flexible movement joint for floor / wall ceramic coverings.
€8.13
External angle of 90º for DILEX-EHK. Half-round profile or cove-shaped profile sanitary stainless steel for delivery between floor / wall in ceramics.
€10.57
External angle of 135º for DILEX-EHK. cove-shaped profile sanitary stainless steel to solve meetings and delivery between floor and wall.
Movement joint

DILEX-EHK - 90º internal angle

153
€10.57
90º internal angle for cove-shaped profile sanitary DILEX-EHK. Half stainless steel rod for floor and wall meetings in ceramic coatings.
€10.57
135º internal angle for DILEX-EHK. cove-shaped profile sanitary or half stainless steel rod for delivery between floor / wall in ceramic coatings.
€10.32
Splicing accessory for DILEX-EHK. cove-shaped profile sanitary stainless steel for delivery between floor / wall in ceramic coatings.
€7.95
External angle 90º DILEX-HKU. Stainless steel half round profile. for interior floor / wall corners with high hygienic requirements.
€7.95
External angle 135º DILEX-HKU. Stainless steel half round profile. for interior floor / wall corners with high hygienic requirements.
€7.95
Internal angle 90º for DILEX-HKU. Stainless steel half round profile. for interior floor / wall corners with high hygienic requirements.
€7.95
Internal angle 135º for DILEX-HKU. Stainless steel half round profile. for interior floor / wall corners with high hygienic requirements.
€7.76
Splicing accessory for DILEX-HKU. Stainless steel half round profile. for interior corners between walls with high hygienic requirements.
€25.74
External angle 90º for DILEX-AHK Rondec. Profile of sanitary cove-shaped profile or half aluminum cane for meeting between floor and wall, kitchen countertops.
€25.74
External angle 90º for DILEX-AHK Quadec. cove-shaped profile sanitary or half aluminum cane for floor and wall meetings, kitchen countertops with ceramic tiles.
Movement joint

DILEX-AHK - 90º internal angle

153
€25.74
Internal angle 90º for DILEX-AHK. Aluminum half-round profile for meeting between floor and wall, kitchen countertops with ceramic tiles.
€25.74
135º internal angle for DILEX-AHK. Aluminum half-round profile for meeting between floor and wall, kitchen countertops with ceramic tiles.
€16.52
Cap for DILEX-AHK. Aluminum half-round profile for meeting between floor and wall, kitchen countertops or shelves with a ceramic coating.
Movement joint

DILEX-AHK - Splice Accessory

153
€3.90
Splice for DILEX-AHK. Aluminum half-round profile for meeting between floor and wall, kitchen countertops or shelves with a ceramic coating.
€25.74
External angle 90º for cove-shaped profile sanitary DILEX-AHKA. Aluminum cane half profile for joining floors, walls and kitchen countertops
€25.74
External angle 135º for DILEX-AHKA. Scottish sanitary profile in half aluminum shank for joining floors and walls in a hygienic way.
€25.74
Internal angle 90º for the Scottish sanitary model DILEX-AHKA. Aluminum cane half profile for hygienic joints between floors and walls.
€25.74
135º internal angle for DILEX-AHKA. Profile half cane or cove-shaped profile sanitary aluminum for clean joints between floors and walls.
€16.52
Right cap or cap for cove-shaped profile sanitary DILEX-AHKA. Aluminum half-round profile for joining floors, walls and kitchen countertops.
€16.52
Left cap for DILEX-AHKA. Profile of sanitary cove-shaped profile in half aluminum cane for joining floors and walls in a hygienic and clean way.
Acoustic isolation

DITRA-SOUND-KB - Band or overlap

153
€15.30
Band or band of union. Sound insulation and to cover cracks on cracked supports. Coated polyethylene for ceramic coatings.
€3.90
DILEX-HKU interior splicing accessory. Stainless steel half round profile. for corners between walls with high hygienic requirements.
€6.84
DILEX-HKU cap or plug accessory. Stainless steel half round profile. for interior corners between walls with high hygienic requirements.
€10.40
Rubber for decorative borders or listels for kitchens and bathrooms ARCLINE-APE model. Decorative lists for accessory placement ARCLINE-BAK
Skirting and coved-shaped profiles

DESIGNBASE-CQ - Aluminium cable hiding skirting

153
€73.58
Cable hiding plinth in lacquered or anodized aluminum with cable duct and installations. High-quality aluminium skirting profile made from colour-coated or anodised aluminium for creating skirting covers with an integrated cable duct.
€103.98
Finishing profile for the exposed edges of balconies and terraces that have an existing sloped screed. The projecting bonding flange is recessed to allow for the use of Schlüter JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile.
Accesories for balcony Profiles

BARA-RTK - external angle 90°

153
€52.82
External angle 90 ° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTK - internal angle 90°

153
€52.82
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTK - external angle 135°

153
€58.15
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTK - splice

153
€3.04
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKEG - external angle 90°

153
€54.61
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKEG - internal angle 90°

153
€54.61
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKEG - external angle 135°

153
€54.61
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTP - external angle 90 °

153
€44.39
External angle 90 ° for gutter profile to be placed on existing balconies and terraces, and serves as a support for the Schlüter®-BARIN drainage gutters.
€126.90
Dripper profile for placement with DITRA-DRAIN sheet on a mortar with slope. The perforated outer edges give the outer perimeter of tiled areas a neat appearance. Schlüter BARA-RAKE is especially suited for assemblies with the bonded drainage mat Schlüter DITRA-DRAIN.
Balcony Profiles

BARA-RAP - Aluminum cover profile

153
€72.96
Cover profile made of colour coated aluminium. Together with the profile Schlüter BARA-RW, it covers the exposed edges of balconies and terraces. Schlüter BARA-RAP is clipped onto this carrier profile and provides a neat finishing edge while protecting the exposed screed edges from deterioration and the weather.
Adhesive tape of polyethylene with anchoring fleece on the front side and a self adhesive butyl coating on the backside. It is suitable for creating an adhesive flange for reliable waterproof connections between the bonded waterproofing assembly Schlüter KERDI and the edge of a Schlüter BARA-RKL profile.
€151.86
Drainage profile with lacquered aluminum drain openings. It is suitable for laying large raised or gravel / gravel tiles. It has a slot for fixing the Schlüter®-BARIN gutter system.
Balcony Profiles

BARIN-SR - Aluminum gutter system

153
€89.11
Lacquered aluminum gutter system for water evacuation on terraces and balconies. They are fixed with the Schlüter BARA profiles.
Accesories for balcony Profiles

BARIN-SR - End caps set

153
€31.01
Lacquered aluminum gutter system for water evacuation on terraces and balconies. Fixing these gutters with the Schlüter®-BARA profiles.
Accesories for balcony Profiles

BARIN-SR - external angle 90°

153
€101.77
External angle 90 ° for lacquered aluminum gutter system for water evacuation on terraces and balconies. The fixing of these gutters to the Schlüter®-BARA profiles is planned.
Accesories for balcony Profiles

BARIN-SR - external angle 90 ° left

153
€129.81
External angle 90 ° left for lacquered aluminum gutter system for water evacuation on terraces and balconies. The fixing of these gutters to the Schlüter®-BARA profiles is planned.
Accesories for balcony Profiles

BARIN-SR - external angle 90° right

153
€129.81
External angle 90 ° right for lacquered aluminum gutter system for water evacuation on terraces and balconies. The fixing of these gutters to the Schlüter®-BARA profiles is planned.
Accesories for balcony Profiles

BARIN-SR - external angle 135°

153
€101.77
External angle 135 ° for lacquered aluminum gutter system for water evacuation on terraces and balconies. The fixing of these gutters to the Schlüter®-BARA profiles is planned.
Accesories for balcony Profiles

BARIN-SR - internal angle 90°

153
€101.77
90 ° internal angle for lacquered aluminum gutter system for water evacuation on terraces and balconies. The fixing of these gutters to the Schlüter®-BARA profiles is planned.
Accesories for balcony Profiles

BARIN-SR - internal angle 135°

153
€101.77
90 ° internal angle for lacquered aluminum gutter system for water evacuation on terraces and balconies. The fixing of these gutters to the Schlüter®-BARA profiles is planned.
Accesories for balcony Profiles

BARIN-SR - Drain set

153
€46.59
Drain for lacquered aluminum gutter system for water evacuation on terraces and balconies. Gutter downspouts to Schlüter®-BARA profiles.
Accesories for balcony Profiles

BARIN-R AC - DN60 - Downpipe

153
€42.72
Downpipe for lacquered aluminum gutter system for water evacuation on terraces and balconies. Gutter downpipe to Schlüter®-BARA profiles.
Accesories for balcony Profiles

BARIN-R AC - DN60 - Angle 72 °

153
€49.07
72 ° angle for lacquered aluminum gutter system for water evacuation on terraces and balconies. Curve or corner for Schlüter®-BARA profiles.
Accesories for balcony Profiles

BARIN-R AC - DN60 - Fork

153
€110.57
Fork for lacquered aluminum gutter system for water evacuation on terraces and balconies. Derevation for gutters to Schlüter®-BARA profiles.
Accesories for balcony Profiles

BARIN-R AC - Anchor sleeve

153
€28.40
Magüito for system of lacquered aluminum gutters for the evacuation of water on terraces and balconies. Sleeves for Schlüter®-BARA profiles.
Accesories for balcony Profiles

BARIN-R AC - DN50 - Gargoyle

153
€92.47
Gargoyle for lacquered aluminum gutter system for water evacuation on terraces and balconies. Landfill or drain for Schlüter®-BARA profiles.
Accesories for balcony Profiles

BARIN-R AC - DN60 - Clamp set

153
€19.69
Drainage pipe clamps. Schlüter BARIN-R system, colour lacquered aluminium pipes with matching special parts.
Accesories for balcony Profiles

BARIN-R AC - DN60 - Threaded Python

153
€5.09
Python for lacquered aluminum gutter system for water evacuation on terraces and balconies. Fixing for Schlüter®-BARA profiles.
Accesories for balcony Profiles

BARIN-R Z / K - Zinc Fork

153
€115.16
Zinc hood or hood to cover the connection of Schlüter®-BARIN Ø 60 mm pipes to the general pipe.
Accesories for balcony Profiles

BARIN-R Z / K - Copper fork

153
€129.81
Copper fork or coupling to cover the connection of Schlüter®-BARIN Ø 60 mm pipes to the general pipe.
U-shaped stainless steel profile with brushed finish and double perforation. Suitable for fixing and mounting Schluter KERDI-BOARD extruded polystyrene panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for visual finishing in partition walls and shelves.
Brushed stainless steel profile in U-shape with single perforation. Suitable for fixing and mounting Schluter KERDI-BOARD panels. Available in different sizes depending on the thickness of the panel used.  Particularly suitable for finishing kitchen worktops and utility rooms.
Finishing profiles for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds. Is designed for assemblies with the bonded uncoupling membrane Schlüter DITRA 25. The closed outer edges give the outer perimeter of tiled areas a neat appearance.
Cover joint profiles

T-shaped profile as a floor transition

153
€7.65
Flashing, joint or T-shaped profile installed as a transition between adjoining floor coverings of the same height e.g. ceramic tiles or natural stone, parquet flooring, concrete pavers, PVC laminate etc.
Accesories for balcony Profiles

BARA-RTKE - external angle 90º

153
€60.65
External angle 90° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKE - internal angle 90º

153
€60.65
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKE - external angle 135º

153
€60.65
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKE - splice

153
€3.31
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Balcony Profiles

BARA-RK - Aluminum balcony gutter

153
€78.04
Edging profile for the exposed edges of surface coverings on balconies and terraces. The profile pro- vides a neat edge appearance while protecting the exposed edges of the screed bed against weathering and corrosion.
€78.64
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
€100.89
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
€71.11
Edging profile for exposed edges of surface coverings on balconies and terraces with finished sloped screeds. The exterior leg of the profile is shaped to form a protruding drip lip. Bottom wing gutter and an upper flange for pavement protection.
€100.94
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Balcony Profiles

BARA-RW - Dripper L-shaped profile

153
€49.71
L-shaped finishing profile made of stainless steel or colour coated aluminium for the exposed edges of balconies and terraces. The profile produces a visually appealing edge finish and protects the exposed edges of the structural slab from weather and corrosion. 
€127.21
BARA-RKL is a dripper profile with lacquered aluminum drain. Suitable for large format raised or gravel / gravel tiles.
Skirting and coved-shaped profiles

DESIGNBASE-SL - Aluminum skirting profile

153
€34.44
Baseboard profile lacquered or anodized aluminum. The metal skirting board is fixed to the wall with a suitable adhesive. High-quality coated or anodised aluminium for the quick creation of decorative skirtings.
€82.49
Aluminum LED skirting board profile with numerous applications that can be used as a plinth or end profile on vertical surfaces. Aluminum profiles with a visible surface of 10 mm width and a free space of 39 mm, which offer the possibility of housing different LED strips inserted into it. (Profile only, does not include diffuser or LED lights)
Accesories for balcony Profiles

BARA-RTK - Special connection piece

153
€3.04
BARA-RTK is a finishing profile for the exposed edges of the slabs on balconies and terraces built with slopes, which will later be covered with ceramic tiles.
Edging & outside wall corners profiles

JOLLY-AC - Lacquered aluminum edging profile

153
€16.53
Edging profile that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
Product added to wishlist
Product added to compare.