Novolistel 3 Inox - Listelo de acero inoxidable

Novolistel 3 Inox - Stainless steel corner edge profile

New

Square section profile, made of AISI304 stainless steel, designed to be placed as a decorative listello, pavement separator, or stair tread, among others. Decorative border with easy installation during tiling.

More details

44,05 €

  • seur-banner-003-295x.jpg

WHY CHOOSE US?

FREE SHIPPING
Free shipping costs for orders over € 100. Valid for Spain *, Andorra and Portugal *. (* Peninsula only)

SHIPPING IN 48-72 HOURS
We ship all over Europe. Orders received during the day are normally dispatched the next day, to be delivered in 48-72 hours in the Peninsula once they have been dispatched. (Business days from Monday to Friday)

MORE THAN 20 YEARS OF EXPERIENCE
We advise and solve your doubts before, during and after making the purchase, so that you can guess and enjoy your product.

BUY WITH CONFIDENCE
100% safe and protected, you can pay by Card, Paypal and Transfer.

SATISFACTION GUARANTEE
You have 15 days to return your purchase if you are not completely satisfied and 2 years warranty on all our products.

Preview the shipping fees

Square section profile, made of AISI304 stainless steel, designed to be placed as a decorative listello, pavement separator, or stair tread, among others. Decorative border of easy installation during the tiling, protects the edges in ceramic installations.

Decorative profile available in high-quality high-gloss and brushed finishes, as well as in exclusive color ranges such as the Futura range.

Thanks to its special design, it can be used as:

  • Decorative profile, both horizontal and vertical.
  • Corner butt plate.
  • Pavement separator or transition.
  • Stair tread.
  • Decorative frame.
  • Ceramic finish.
  • Bench top.

Stainless steel corner or corner profile model Novolistel 3 Inox

General characteristics

  • a = 10 mm
  • h = 8, 10, 12 and 15 mm

Applications

Novolistel 3 is a very versatile profile that can be placed as: decorative listello, edge protector, pavement separator, step, finish (countertops, mid-height ...)

Technical characteristics and tests

  • Alloy: AISI 304 stainless steel
  • Corrosion resistance: Salt spray chamber test + 504 hours without variation / UNE 112017: 92
  • Fire resistance: M0 (UNE 23-727-90) / UNE 23-727-90

Materials

Stainless steel

Novolistel 3 stainless steel is a profile made of AISI-304 stainless steel. All batches of material used are subjected to a chemical composition test to determine that they meet the alloy specification. Stainless steel has also been tested for corrosion resistance, exceeding 500 hours of exposure without showing signs of corrosion. Stainless steel is a highly resistant and durable material with an excellent surface appearance that does not degrade over time. weather. The available finish is high gloss. All finishes are smooth and slightly porous, thus facilitating installation hygiene.

Zamak

The complementary pieces of Novolistel 3 are made of Zamak. Zamak is a non-ferrous Zinc alloy with Aluminum, Magnesium and Copper (UNE EN 1774). It is tenacious, it has high hardness, great mechanical resistance and excellent plastic deformability. The surface finish applied to it protects it and is similar to Novolistel 3 finishes.

Placement

As a decorative profile

  1. Spread abundant bonding material on the surface to be tiled and smooth to the approximate height where you are going to place the listel.
  2. Lay the tiles at the ends of the next row aligning them with the previous ones. Then position the aligned profile by embedding the fixing wing between the wall and the tiles, making sure to press so that the gripping material passes through the fixing wing dies.
  3. Lay the remaining tiles gently pressing for optimal adhesion.
  4. Continue tiling the wall below the profile to the desired height.
  5. Finally, wipe off any excess material and allow to dry.

As i sing

  1. Clad one of the walls until you reach the joining edge. Spread abundant gripping material on the surface where the profile will be placed.
  2. Position the profile aligned with the wall edge and the cladding and press so that the bonding material passes through the fixing wing dies.
  3. Place the tiles on the fixing wing and press for optimal adhesion.
  4. Continue with the plating.
  5. Finally, clean the excess material, remove the protective film if applicable and let dry.

As a pavement separator

  1. Spread abundant gripping material on the surface where you are going to install the flooring.
  2. Then place the profile and press it so that the gripping material passes through the fixing wing dies.
  3. Place a tile on the profile fixing wing and press for optimal contact with the bonding material.
  4. Repeat the operation placing tiles on both sides of the profile until the installation is complete.
  5. Finally clean the excess material, remove the protective film and allow to dry.

As a step or counter top

  1. Spread plenty of grip material on the riser surface.
  2. Place the tile on the riser and press for optimal adherence.
  3. Next, spread plenty of gripping material on the tread tread and align the profile on the tread vertex so that it rests on the riser (do not allow overhang, the lever effect could tear off the tread and tiling).
  4. Press for the gripping material to pass through the fixation wing dies.
  5. Place the tile on the tread of the step, aligning it with the profile and ensuring optimum adhesion6. Finally, clean the excess material, remove the protective film if applicable and let dry.

Cleaning and maintenance

Cleaning the material immediately after installation is essential to prevent the remains of mortar, cement or iron particles from scouring pads or tools from causing corrosion pitting.

For interior applications, you can use dishwashing liquid, detergent, or liquid soap to remove dirt and possible fingerprints that have been marked. For high gloss finishes you can use a glass cleaner. There are specific stainless steel cleaners on the market that clean it and reduce the appearance of possible stains. Whenever you clean the stainless steel, be sure to rinse it well and dry it completely to avoid tarnishing.

Steel wool or similar products are not recommended, as they can scratch the surface and create corrosion pitting. Take special care in the use of materials containing chlorides, as they are contraindicated since they cause oxidation. Hydrochloric acid or iron products in prolonged contact are also not recommended. Never use ordinary steel cleaners for stainless steel.

No customer reviews for the moment.

Write a review

Novolistel 3 Inox - Stainless steel corner edge profile

Novolistel 3 Inox - Stainless steel corner edge profile

Square section profile, made of AISI304 stainless steel, designed to be placed as a decorative listello, pavement separator, or stair tread, among others. Decorative border with easy installation during tiling.