Novoescocia 4 PVC - Cove-shaped profile overlaid

Cove-shaped profile made of PVC to be installed in tiled installations for easy cleaning the joints. Very easy to install using mastics or adhesives type silicone which also act like a sealing.  Slightly flexible to adapt to the irregularities of any wall or floor.

Profile made of white PVC color. This solution avoids dirtiness making easy cleaning the joints. It is ideal for being installed in areas as industrial kitchens, refrigerators, dressing rooms... It is slightly flexible to adapt to the irregularities of any wall or floor.

Dimensions

• h / a:  14/20 mm, 25/35,4 mm
• Long:  2,50 ml

Applications

Scope of Novoescocia 4 PVC:

• - Corners between walls and kitchen countertops
• - Perimeters in shower trays or bathtubes.
• - Encounters: wall-floor, wall-wall or wall-ceiling botn horizontally and vertically.

It is ideal for bathrooms, kitchens, medical consultations, restaurants, etc...Its design is versatile and is appropriate for homes, offices, public buildings or installations with high requirements of hygiene and cleaning.

Material

Profile made by coextrusion of PVC-P (rigid PVC) and PVC-U (flexible PVC). PVC-U provides a perfect adaptability to corners while PVC-P is suitable, due to its rigidity, to be the piece to be placed in the tiles as a support.

PVC (polyvinyl chloride), is a polar amorphous thermoplastic polymer highly resistant to abrasion, corrosion and a wide range of chemical products. Has a good resistance to impact, low water absorption, low electrical conductivity and is dimensionally stable.

Installation

Please, clean the surface where Novoescocia 4 PVC is going to be installed:

1. Apply a big amount of adhesive on the rear surfaces of the rigid piece of Novoescocia 4.
2. Place the rigid piece on the encounter between wall and bathtube (or the encounter you need) and press, so both faces to join will make perfect contact with the surface.
3. Then, let dry. 

Cleaning and maintenance

The cleaning can be done with water and detergent or specific cleaner diluted. The correct use of bleach do not affect PVC.

It is not recommended using chromic acid, sulfuric acid or organic solvents as ethyl acetate, acetone or toluene.