Home

BAR-RTK BAR-RTK 2
Balcony Profiles

BARA-RTK - Finishing profile for the exposed

153
€103.98
Finishing profile for the exposed edges of balconies and terraces that have an existing sloped screed. The projecting bonding flange is recessed to allow for the use of Schlüter JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile.
BARA-RTKEG
Balcony Profiles

BARA-RTKEG - Finishing profiles for the exposed edges

153
€99.92
Finishing profiles for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds. Is designed for assemblies with the bonded uncoupling membrane Schlüter DITRA 25. The closed outer edges give the outer perimeter of tiled areas a neat appearance.
BARA-RAK BARA-RAK 2
Balcony Profiles

BARA-RAK - Dripper profile for balcony edge

153
€91.13
Finishing dripper profile for balcony or terrasse edge with drip lip for the exposed edges of balconies and terraces that have an existing sloped screed. The projecting bonding flange is recessed to allow for the use of the Schlüter-RONDEC or Schlüter-JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile.
BARA-RAKE BARA-RAKE 2
Balcony Profiles

BARA-RAKE - Dripper profile for DITRA-DRAIN

153
€126.90
Dripper profile for placement with DITRA-DRAIN sheet on a mortar with slope. The perforated outer edges give the outer perimeter of tiled areas a neat appearance. Schlüter BARA-RAKE is especially suited for assemblies with the bonded drainage mat Schlüter DITRA-DRAIN.
KERDI-LINE-F-50 - Floor-level shower tray drainage kit... KERDI-LINE-F-50 - Floor-level shower tray drainage kit... 2
  • New
Drainage of bathrooms, balconies and terraces

KERDI-LINE-F-50 - Floor-level shower tray drainage kit with horizontal central outlet DN50

€311.60
Complete set for floor-level linear showers with horizontal outlet with integrated reverse siphon. Suitable for installation in a central area as well as in a wall area. Complies with DIN EN 1253 with a drainage capacity ≥ 0.8 l/s and an internal water storage height of 50 mm. (Grating and frame not included)
BARA-RAKEG - Aluminum sheet gutter DITRA 25 BARA-RAKEG - Aluminum sheet gutter DITRA 25 2
Balcony Profiles

BARA-RAKEG - Dripper profile for DITRA 25

153
€100.94
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
BARA-RW BARA-RW 2
Balcony Profiles

BARA-RW - Dripper L-shaped profile

153
€49.71
L-shaped finishing profile made of stainless steel or colour coated aluminium for the exposed edges of balconies and terraces. The profile produces a visually appealing edge finish and protects the exposed edges of the structural slab from weather and corrosion. 
BARA-RKK
Balcony Profiles

BARA-RKK - Aluminum balcony gutter profile

153
€78.64
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
BARA-RKKE - Aluminum balcony gutter profile
Balcony Profiles

BARA-RKKE - Aluminum balcony gutter profile

153
€100.89
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
BARA-RKB BARA-RKB 2
Balcony Profiles

BARA-RKB - Aluminum balcony gutter profile

153
€71.11
Edging profile for exposed edges of surface coverings on balconies and terraces with finished sloped screeds. The exterior leg of the profile is shaped to form a protruding drip lip. Bottom wing gutter and an upper flange for pavement protection.
Home
Product added to wishlist
Product added to compare.