Search results

Profile Accessories

FINEC-TS/EN - Corner set

153
€23.90
Corner set accessory for high-quality edging profile for external corners of walls clad with ceramic tiles, vitreous mosaic and plaster finishes. Schlüter-FINEC protects the edge of the cladding, including vitreous mosaic, from mechanical damage and provides an elegant, fine finish.
Profile Accessories

FINEC-E/ES - Corner set

153
€36.21
Corner set accessory for high-quality edging profile for external corners of walls clad with ceramic tiles, vitreous mosaic and plaster finishes. Schlüter-FINEC protects the edge of the cladding, including vitreous mosaic, from mechanical damage and provides an elegant, fine finish.
Corner set accessory for high-quality edging profile for external corners of walls clad with ceramic tiles, vitreous mosaic and plaster finishes. Schlüter-FINEC protects the edge of the cladding, including vitreous mosaic, from mechanical damage and provides an elegant, fine finish.
Accesories for balcony Profiles

BARIN-R AC - DN60 - Clamp set

153
€19.69
Drainage pipe clamps. Schlüter BARIN-R system, colour lacquered aluminium pipes with matching special parts.
Accesories for balcony Profiles

BARIN-SR - End caps set

153
€31.01
Lacquered aluminum gutter system for water evacuation on terraces and balconies. Fixing these gutters with the Schlüter®-BARA profiles.
Accesories for balcony Profiles

BARIN-SR - Drain set

153
€46.59
Drain for lacquered aluminum gutter system for water evacuation on terraces and balconies. Gutter downspouts to Schlüter®-BARA profiles.
Tools and accessories

CLIP Standard - Tile Leveling System

€7.70
Standard leveling clip or shim for the Tile Leveling System. For tiles from 3 to 12 mm thick. Available for joint widths of 0.5, 1, 1.5, 2 and 3 mm. Levelling system for floor and wall tiles that avoids differences in level in the floor and wall joints, ensuring equal pressure distributed throughout the floor or wall.
Tools and accessories

CLIP MAXI - Tile Leveling System

€12.82
Standard leveling clip or shim for the Tile Leveling System. For tiles from 12 to 20 mm thick. Available for joint widths of 1, 1.5, 2 and 3 mm. Levelling system for floor and wall tiles that avoids differences in level in the floor and wall joints, ensuring equal pressure distributed throughout the floor or wall.
Tools and accessories

WEDGE - Ceramic levelling system

€9.26
Adjusting wedge for the Tile Leveling System. Levelling system for floor and wall tiles that avoids differences in level in the floor and wall joints, ensuring equal pressure distributed throughout the floor or wall.
Tools and accessories

PLIERS - Ceramic levelling system

€31.66
Pliers for the Tile Leveling System. For tiles from 12 to 20 mm thick. Available for joint widths of 1, 1.5, 2 and 3 mm. Levelling system for floor and wall tiles that avoids differences in level in the floor and wall joints, ensuring equal pressure distributed throughout the floor or wall.
Edging & outside wall corners profiles

JOLLY-P - Decorative PVC edging profile

153
€6.92
PVC decorative edging profile and skirting covering that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
Edging & outside wall corners profiles

RONDEC-E - Stainless steel rounded edge profile

153
€14.42
RONDEC-E is a finishing and edgeprotection profile for tiled edges and outside corners of tiled surfaces. The reveal of the profile forms a symmetrically rounded corner along the surface edge. RONDEC allows for color coordination with tile and grout and the creation of interesting accents in decorative designs. 
Edging & outside wall corners profiles

RONDEC-A - Anodized aluminum rounded edge profile

153
€16.58
Anodized aluminum rounded profile for ceramic coated wall corners with a spacer to achieve symmetrical joints. Through the spacer, a joint is defined between the profile and the tile. 
Edge countertop profiles

RONDEC-STEP - Aluminum worktop corners

153
€66.45
Decorative profiles for the protection of the edges and edges of kitchen countertops. Aluminum profiles with a smooth finish for shelves and kitchens.
€58.44
Stair nosing profiles with wide non-slip tape (Width 55 mm). Made of brushed stainless steel with a non-slip steppable part. R11 classified according to DIN 51 130.
Structural expansion joints

DILEX-AKWS - Expansion joints for ceramics

153
€49.40
Profile for expansion joints or movement joints with soft PVC band for ceramic tile floors or natural stone. Schlüter DILEX-AKWS is a maintenance- free movement joint profile for tile and natural stone surfaces subject to moderate mechanical stresses.
Floor and wall bridge joints

DILEX-HK - Cove-shaped PVC sanitary profile

153
€32.54
Cove-shaped profile sanitary or PVC half-round profile, for floor / wall. Hygiene and sanitary cleaning in the food industry, industrial kitchens or similar.
Floor and wall bridge joints

DILEX-AHKA - cove-shaped profile sanitary aluminum

153
€48.45
Coveshaped aluminium profiles for internal wall corners, kitchen worktops, or surfaces with ceramic coverings. Schlüter®-DILEX-AHK/- AHKA profiles are available in a variety of anodised finishes. 
Accesories for balcony Profiles

BARA-RTKE - external angle 90º

153
€60.65
External angle 90° for water ramp profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKE - internal angle 90º

153
€60.65
Internal angle 90 ° for water gutter profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKE - external angle 135º

153
€60.65
External angle 135 ° for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
Accesories for balcony Profiles

BARA-RTKE - splice

153
€3.31
Splice for watershed profile for placement on a slope with slope. The profile has a system to fix the Schlüter®-BARIN gutter system.
€78.64
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
€100.89
T-shaped finishing profiles with a short drip lip for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds.
€126.90
Dripper profile for placement with DITRA-DRAIN sheet on a mortar with slope. The perforated outer edges give the outer perimeter of tiled areas a neat appearance. Schlüter BARA-RAKE is especially suited for assemblies with the bonded drainage mat Schlüter DITRA-DRAIN.
€357.95
Structure expansion joints up to 50 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
Decorative joints profiles for tiles

Novolistel Maxi - Decorative border square profile

165
€16.65
Decorative profiles of square section, suitable for listel, separator, corner, step, etc. Novolistel is made of composite (Wood Plastic Composites) and it´s suitable for many different situations arising in thin bed adhesive tile coverings. This special symmetrical square profile is recommended for multiple finishing effects. 
Edge countertop profiles

SCHIENE-STEP - Aluminum worktop corner

€64.63
Decorative profiles for the protection of the edges and edges of kitchen countertops. Aluminum profiles for shelves, stair steps or countertops.
€374.89
Structure expansion joints up to 60 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas.  DELIVERY TIME 7-10 DAYS APPROXIMATELY
€219.35
Structure expansion joints up to 30 mm wide. Its design facilitates the absorption of movements derived from thermal variations, allowing movement in three axes. With a non-slip grooved face and very heavy load support, it is excellent for high traffic areas. DELIVERY TIME 7-10 DAYS APPROXIMATELY
Decorative joints profiles for tiles

Novolistel MaxiSahara - Decorative border square profile

165
€23.08
Square section profile made of PVC with the addition of vegetable fibres from recycled organic waste.Fluted finish that can be installed both indoors and outdoors, providing protection for corners. Available in various colours to provide a solution to multiple trends.
Edging & outside wall corners profiles

JOLLY-AC - Lacquered aluminum edging profile

153
€16.53
Edging profile that protects the external corners of tiled wall surfaces against damage. The range of available sizes and finishes permits the matching of the profile to a wide variety of tile and grout colours, or allows many design opportunities through the use of contrasting colours.
Edging & outside wall corners profiles

FINEC-TS - Ultra slim edge profile

153
€35.70
High-quality finishing profile for creating external edges of tile coverings or rendered surfaces. Schlüter-FINEC protects the edge of the covering – including glass mosaics – from mechanical damage with a slim, elegant corner formation.
Edging & outside wall corners profiles

FINEC-A - Ultra slim edge profile

153
€15.87
High-quality finishing profile for creating external edges of tile coverings or rendered surfaces. Schlüter-FINEC protects the edge of the covering – including glass mosaics – from mechanical damage with a slim, elegant corner formation.
€10.02
Extruded profile that finishes and protects the edges of tiled coverings, as well as other surfacing materials. For transitions between different surface coverings (e.g. tile to carpet); dado coverings; edge protection at expansion joints; decorative edging for stairs, etc.
Transition profile to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Decorative joints profiles for tiles

RONDEC-DB - Decorative aluminum borders

153
€20.98
Decorative borders, aluminum profiles or listels for kitchens and bathrooms RONDEC-DB model. Decorative lists with rounded shape.
Edging & outside wall corners profiles

ECK-E - Stainless steel profile for protecting the outside corners

153
€56.36
Stainless steel edge profile with a wide surface that forms a symmetrically rounded outside corner for the tiled surface with an excellent edge protection in case of mechanical stresses, as well as a clean and decorative finish for the wall corner.
Edging & outside wall corners profiles

ECK-E - 135º stainless steel corners

153
€91.72
Stainless steel edge profile corners 135º open angle for corner protection. Corners for tiles in encounter of non-straight walls with a wide surface that forms a symmetrically rounded outside corner for the tiled surface with an excellent edge protection in case of mechanical stresses, as well as a clean and decorative finish for the wall corner.
Embedded stair profile

TREP-B - Anti-slip stair nosing trim

153
€27.84
Stair nosing profile made in alumminium with anti slip tread insert of a rigid PVC and soft PVC slip resistant surface. Stair edging profile for tiles for technical effective, practical and long-lasting solutions in the stairnosing finishes, according to the most recent UE safety standards which provide proper anti-slip elements.
Embedded stair profile

TREP-S - Rung profiles with non-slip rubber

153
€20.35
Stair nosing profile made in alumminium with anti slip tread insert of a rigid PVC and soft PVC slip resistant surface. Stair edging profile for tiles for technical effective, practical and long-lasting solutions in the stairnosing finishes, according to the most recent UE safety standards which provide proper anti-slip elements.
Structural expansion joints

DILEX-BT - Aluminum structural expansion joint

153
€99.09
Aluminum profile for structural expansion joints with articulated lateral connection and tongue and groove central part. With this an absorption of three-dimensional movements is possible.
Structural expansion joints

DILEX-KS - Expansion joints for ceramics

153
€52.04
Expansion joints or movement joints with edge protection consisting of lateral anchoring legs made of aluminium or stainless steel, which are connected to a replaceable movement zone made of soft rubber.
Structural expansion joints

DILEX-EKSB - Ultra thin expansion joints

153
€78.14
Profile for expansion joints or fine and ultrafine movement for pvc or linoleum flooring. Maintenance free and suitable for heavy mechanical wear.
Structural expansion joints

DILEX-KSA - Expansion joints and lateral delivery

153
€31.24
Joint of movement, expansion and lateral delivery of aluminum or stainless steel with flexible soft plastic zone replaceable. The profile’s anchoring legs, made of aluminium or stainless steel, are connected to a replaceable movement zone made of soft PVC. The profile is used for creating transitions between coverings and fixed structures such as window...
Structural expansion joints

DILEX-BWB - Plastic expansion joint

153
€18.34
Profile for expansion joints or movement joints with hard plastic side elements. The upper movement zone is 10 mm soft CPE.
€103.98
Finishing profile for the exposed edges of balconies and terraces that have an existing sloped screed. The projecting bonding flange is recessed to allow for the use of Schlüter JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile.
€91.13
Finishing dripper profile for balcony or terrasse edge with drip lip for the exposed edges of balconies and terraces that have an existing sloped screed. The projecting bonding flange is recessed to allow for the use of the Schlüter-RONDEC or Schlüter-JOLLY protective edge profiles, which are available in the same colours as the balcony edging profile.
€100.94
Dripping for balconies with drippers for placement with DITRA 25 sheet on a mortar with slope. Finishing profile for exposed edges of covering assemblies on balconies and terraces with existing sloped screeds. The perforated outer edges give the outer perimeter of tiled areas a neat appearance.
Joints and profiles for concrete

Novojunta concrete 40 - PVC Concrete Joint rule

€318.42
40 mm high hollow PVC joint rule profile for concrete joints that absorbs the expansion of concrete in screeds.It allows the cracking of concrete screeds, avoiding cutting with a disc on the back.Supplied in packs of 60 bars 2.5 m each, 150 m in total.(Approximate delivery time 7 days).
Edging & outside wall corners profiles

Novocanto Maxi - Composite rounded edge profile

165
€9.25
Corner profiles for tiles designed for edge protection. Decorative profiles for ceramic installations. Made of composite. Rounded edge profile designed to protect edges and corners of tilings. This material belongs to WPC family (Wood Plastic Composites), adding vegetable fibers in its composition and contributing so to preserv the Environment. 
€42.26
Stair nosing made of Maxi, an exclusive raw material of WPC (Wood Plastic Composite) family of products. Its particular geometry and appearance contribute to embellish all kind of stairs, specially the rustic ones, being the perfect alternative to natural wood profiles.
Edging & outside wall corners profiles

Novopared Novosuelo - PVC edge corner profile

165
€4.67
PVC corners for wall or floor economical modern line at right angles as a finish to protect and decorate corners of ceramic tiles.  Profile with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floors or walls between 6 and 12 mm in height.
€35.76
Stair nosing in natural solid wood, with a supporting angular structure in perforated  luminium to improve its fixing and stability. Its simple shape and size make it a finish suitable for all kind of environments, either modern or traditional. Ideal for step applications in domestic areas, it performs well also to contour tiled kitchen tops.
Transition profile designed to protect tile edges and provide a smooth transition between tile coverings and floor coverings at lower elevations or finished concrete. The sloped surface eliminates trip hazards and allows easy access for wheel carts.
Expansion joint profile for structural movement in aluminum for semi heavy and intense traffic and high load capacity. Due to its design, it admits dimensional movements avoiding cracks as a consequence of the expansion and contraction of the construction elements.
Accessibility and Safety

Novonivel 2 - Ramp Transition Profile For Tile

165
€20.35
Ramp Transition Profile For Tile to avoid the difference of level created when laying floorings at a different height as when a new flooring is layed onto an old one. It is specially designed to be placed after having placed the flooring. It will be fixed with a silicone-type adhesive. It is available in anodized silver matt finish.
Accessibility and Safety

Novonivel 3 - Transition profile for pavement

165
€19.14
Transition profile for finishing and transition of floor and wall tiles. Variable height. Aluminum profile to avoid ramps between floorings at different height, for example when placing a new flooring over an old one (typical situation in rehabilitation works).
Skirting and coved-shaped profiles

DESIGNBASE-SL - Aluminum skirting profile

153
€34.44
Baseboard profile lacquered or anodized aluminum. The metal skirting board is fixed to the wall with a suitable adhesive. High-quality coated or anodised aluminium for the quick creation of decorative skirtings.
Floors profiles

SCHIENE-ES - Tile corner profile

153
€28.17
Transitions or coverings profile to protect and decorate edges or edges of ceramic tiles and floors. With joint separator between profile and tile.
Edging & outside wall corners profiles

Novopilastra - Aluminum corners profile

165
€23.14
Profile of anodized aluminum based on simple, pure and perfect shapes. It is perfect to finish and protect wall corners and work surfaces and to beautify wall tiles in an industrial style environment. Currently, it is one of the most important decorative trends.
Profile with slimm visible side made of aluminium or brass which can be curvable, designed to cover joints and separate floorings. This profile, due to its dimensions, is intended to be installed before or after the tiling. The brass model has two heights available. The profile is perfect to be installed in floorings like marble or terrazzo as it can be...
Skirting and coved-shaped profiles

DESIGNBASE-CQ - Aluminium cable hiding skirting

153
€73.58
Cable hiding plinth in lacquered or anodized aluminum with cable duct and installations. High-quality aluminium skirting profile made from colour-coated or anodised aluminium for creating skirting covers with an integrated cable duct.
€64.23
Non-slip plate for stair steps. Anodized aluminum plate profile with non-slip tape. R13 certified according to DIN51130 standard. They meet the strictest safety regulations, increasing the safety of any pavement. It is placed on top of the existing tiling. Ideal for public places with a lot of traffic.
€75.42
Natural anodized aluminum flashing with butyl adhesive. Designed to protect and beautify expansion joints on facades, walls, ceilings and floors with light traffic with a width between 60 and 140 mm. Also available with drill to screw to the bracket. (Delivery time 7 days approximately)
Stair nosing to be placed after tiling work, made of anodized aluminum silver matt finish. This profile has a photoluminescent strip useful as a guide in case of darkness. With striated non-slip surface, is very light and easy to install after tiling. Delivered with protective film. Ideal to be placed in public areas.
Slim ramp profile made of aluminum designed to avoid discontinuities in floorings such as low thickness ceramic , vinyl floorings or carpets. The profile has a wide and smoothed visible side with small grooved that favor the slide resistance. Available in anodized aluminum anod. matt silver. Delivered with countersunk holes to improve its fixing by using...
€19.24
Embellisher profile for joints. The top section covers and decorates the joint created by tiles. For its placement, just incrust it into the joint between floorings. It can be placed before or after the flooring. It is available in matt silver and matt gold finishes.
Straight edge trim with simple lines made of aluminium, intended to be installed as an edge protector, flooring separator, countertop finish... It can be installed with floorings or wall tiles between 3 and 30 mm width.
€15.11
Step plate profile made of natural aluminum designed to be placed as an orientation and guide element for people with visual disabilities. Its grooved relief IMPROVES THE SLIP RESISTANCE (Rd) of any pavement.
Stairs nosing profiles

Non-slip PVC stair profile

€455.15
Profiles for protection of steps or non-slip PVC stair mats. Plastic profiles that comply with safety regulations. PVC (Polyvinylchloride) tread edge or stair nosing for stair tread protection. Wide grooved surface that gives it anti-slip characteristics. Supplied in packages of 15 bars 3.00 m long.
€13.30
Profile made of natural aluminum with non-slip grooved face. Its main function is as a non-slip element on stairs or ramps with very thick pavements such as terrazzo, granite or marble, although it can also be installed with thinner ceramic pavements.
Edging & outside wall corners profiles

Novocanto Flecha - Aluminum tile corner

165
€24.25
Profile with arrow shape and double wing, which facilitates the alignment of the tiles during installation. Once installed, the visible face keeps the edges of the tiles hidden, protects them from possible damage. Made of aluminum and available in two heights.
€12.62
Anti-slip profile in natural aluminum for embedding and with a grooved face that reduces the slipperiness of the flooring and increases its safety. Its main function is as a non-slip element on stairs or ramps with very thick pavements such as terrazzo, granite or marble, although it can also be installed with thinner ceramic pavements.
Accesories for balcony Profiles

BARA-RTK - Special connection piece

153
€3.04
BARA-RTK is a finishing profile for the exposed edges of the slabs on balconies and terraces built with slopes, which will later be covered with ceramic tiles.
Skirting and coved-shaped profiles

Novorodapie Maxi - Skirting board for technical raised floors

165
€113.73
Skirting board, socket or profile designed to be installed as a finish off for technical raised floors interraces, balconies, runways, swimmingpool floors, etc. Delivered in kit with all the necessary elements for the installation and its adjustment during the installation work. Fits with any kind of plot for raised floors and has a quick and easy...
Expansion joint which consists of a central body made of flexible EPDM and two metal sides. One of the sides acts like a cover plate, hiding the rubber inside. This expansion joint has two different functions: is functional, as it absorbs expansions and contractions, and decorative.
€2.61
Side cover accessory for LED skirting board, profile or listello that can be used as a skirting board made of aluminium for installations with laminated plasterboard or ceramic coating. It allows the installation of a LED lighting strip in the inner recess, giving the profile a double functionality with a high decorative charge thanks to the indirect...
Finishing profiles for the exposed edges of covering assemblies on balconies and terraces with finished sloped screeds. Is designed for assemblies with the bonded uncoupling membrane Schlüter DITRA 25. The closed outer edges give the outer perimeter of tiled areas a neat appearance.
€51.32
Novopeldaño MaxiTokyo is a stair nosing made of Maxi, an exclusive raw material of WPC (Wood Plastic Composite) family of products. Its particular geometry and appearance contribute to embellish all kind of stairs, specially the rustic ones, being the perfect alternative to natural wood profiles.d of stairs, specially the rustic ones, being the perfect...
Edging & outside wall corners profiles

FINEC-E - Stainless steel ultra slim edge profile

153
€26.13
Stainless steel high-quality finishing profile for creating external edges of tile coverings or rendered surfaces. Schlüter-FINEC protects the edge of the covering – including glass mosaics – from mechanical damage with a slim, elegant corner formation.
€154.24
The Novojunta Pro Basic SP structural expansion joint is an aluminum and EPDM rubber profile intended to be placed in structural joints in a superimposed manner once the installation of the pavement or cladding has been completed. It absorbs stresses and deformations and is suitable for supporting light load traffic.
Aluminium profiles or ramp end caps with flange or fin for connection. Transition profile with a wide visible face whose surface has been grooved to offer greater resistance to slipping. Its reinforced base allows it to withstand loads and a high level of traffic. This profile is made of anodised aluminium, so it can be installed outdoors or indoors.
A removable fleece used to create temporary floor coverings. Made of recycled PET with a self-adhesive coating on the back, REFLEECE measures 1/32” (0.8 mm) thick and is suitable for the application of temporary, removable tile and natural stone coverings. REFLEECE is easy to install and can be removed during deconstruction without causing damage to the...
Product added to wishlist
Product added to compare.